Abstract:Reliable non-destructive testing (NDT) ultrasound systems for timber composite structures require quantitative understanding of the propagation of ultrasound beams in wood. A finite-difference time-domain (FDTD) model is described, which incorporates local anisotropy variations of stiffness, damping and density in timber elements. The propagation of pulsed air-coupled ultrasound (ACU) beams in normal and slanted incidence configurations is reproduced by direct definition of material properties (gas, solid) at each model pixel. First, the model was quantitatively validated against analytical derivations. Time-varying wavefronts in unbounded timber with curved growth rings were accurately reproduced, as well as the acoustic properties (velocity, attenuation, beam skewing) of ACU beams transmitted through timber lamellas. An experimental sound field imaging (SFI) setup was implemented at NDT frequencies (120 kHz), which for specific beam incidence positions allows spatially resolved ACU field characterization at the receiver side. The good agreement of experimental and modeled beam shifts across timber laminates allowed extrapolation of the inner propagation paths. The modeling base is an orthotropic stiffness dataset for the desired wood species. In cross-grain planes, beam skewing leads to position-dependent wave paths. They are well-described in terms of the growth ring curvature, which is obtained by visual observation of the laminate. Extraordinary refraction phenomena were observed, which lead to well-collimated quasi-shear wave coupling at grazing beam incidence angles. The anisotropic damping in cross-grain planes is satisfactorily explained in terms of the known anisotropic stiffness dataset and a constant loss tangent. The incorporation of high-resolution density maps (X-ray computed tomography) provided insight into ultrasound scattering effects in the layered growth ring structure. Finally, the combined potential of the FDTD model and the SFI setup for material property and defect inversion in anisotropic materials was demonstrated. A portable SFI demonstrator was implemented with a multi-sensor MEMs receiver array that captures and compensates for variable wave propagation paths in glued laminated timber, and improves the imaging of lamination defects.

The Study of Wood Knots Using Acoustic Nondestructive Testing Methods.

Detection of Knot Defects on Coniferous Wood Surface Using Near Infrared Spectroscopy and Chemometrics

Using Stress Wave Based Technology for Wood Material Nondestructive Testing

Preliminary Study on Detection of Wood Structure Defects and Evaluation of Residual Elastic Modulus

Static Method and Stress Wave Nondestructive Testing Study on Modulus of Elasticity of Wood

Research on stress wave wood nondestructive testing technology

Grain effect on the accuracy of defect detection in wood structure by using acoustic-laser technique

Particle image velocimetry technique and ultrasound method to obtain the modulus of elasticity of Bertholletia excelsa wood

Comparison between static modulus of elasticity, non-destructive testing moduli of elasticity and stress-wave speed in white spruce and lodgepole pine wood

Measurement and Analysis of the Vibration Responses of Piano Soundboards with Different Structures

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Study on damage and fracture characteristics of wood based on acoustic emission b-value and seismic magnitude difference entropy

Intra-Ring Wood Density and Dynamic Modulus of Elasticity Profiles for Black Spruce and Jack Pine from X-ray Densitometry and Ultrasonic Wave Velocity Measurement

Comparative Study of Ultrasonic Techniques for Reconstructing the Multilayer Structure of Composites

Acoustoelastic Guided and Surface Waves in Waveguides with Focus on Non-Destructive Testing and Structural Health Monitoring Applications —A Review of Recent Studies

Characterizing Mechanical Properties of Layered Engineered Wood Using Guided Waves and Genetic Algorithm

Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing

EVALUATION OF WOOD DAMAGE AND FRACTURE BEHAVIOR BASED ON ENERGY ENTROPY OF ACOUSTIC EMISSION SIGNALS

Recurrence rate spectrograms for impact localization in wood

Evaluating Mechanical Properties of Chinese-fir with Ultrasonic Nondestructive Testing

WD-1D-VGG19-FEA: An Efficient Wood Defect Elastic Modulus Predictive Model