Abstract:Abstract This work was undertaken to investigate the feasibility of using near infrared spectroscopy (NIR) and partial least squares regression (PLS) as a tool to characterize the basic wood properties of Norway Spruce (Picea abies (L.) Karst.). The wood samples originated from a trial located in the province of Västerbotten in Sweden. In this trial, the effects of birch shelterwoods (Betula pendula Roth) of different densities on growth and yield in Norway spruce understorey were examined. All Norway spruce trees in each shelterwood treatment were divided into three growth rate classes based on diameter at breast height (1.3 m) over bark. Five discs were cut from each tree (i.e. from the root stem, and at 20%, 40%, 60%, and 80% of the total height). The discs from 40% tree height were used (i.e., where the largest variations in annual ring widths and wood density were found). A total of 27 discs were selected. The discs were used for measuring annual ring widths, wood density, average fiber length and the fiber length distributions. Milled wood samples prepared from the discs were used for recording NIR spectra. PLS regression was used to generate prediction models for the wood properties (Y-matrix) and NIR spectra (X-matrix) as well as between the wood properties (Y-matrix) and the fiber length distributions (X-matrix). One set of models was generated using untreated spectra and fiber length distributions. For a second set of models the structure in the X-matrix, which was orthogonal to the matrix described by the wood properties, was eliminated using a soft target rotation technique called orthogonal signal correction (OSC). The PLS model obtained using “raw” untreated NIR spectra and fiber length distributions had a poor modeling power as evidenced by the cumulative Q2 values. For the PLS models based on untreated NIR spectra the cumulative Q2 values ranged from a minimum of 16% (wood density) to a maximum of 46% (no. of annual rings). Orthogonal signal correction of the X-matrix (NIR spectra or fiber length distributions) gave PLS models with a modeling power corresponding to cumulative Q2 values well in excess of 70%. The improvement in predictive ability accomplished by the OSC procedure was verified by placing four of the 27 observations in an external test set and comparing RMSEP values for the test set observations without OSC and with OSC.

Detection of Knot Defects on Coniferous Wood Surface Using Near Infrared Spectroscopy and Chemometrics

Application of Near Infrared Spectroscopy for Rapid Determination the Geographical Regions and Polysaccharides Contents of Lentinula Edodes.

Machine Vision for Knot Detection and Location in Chinese Fir Lumber

Improving Discrimination Accuracy of Pest-Infested Crabapples Using Vis/NIR Spectral Morphological Features

WD-1D-VGG19-FEA: An Efficient Wood Defect Elastic Modulus Predictive Model

Non-destructive detection of polysaccharides and moisture in<i> Ganoderma</i><i> lucidum</i> using near-infrared spectroscopy and machine learning algorithm

Determination of Coniferous Wood’s Compressive Strength by SE-DenseNet Model Combined with Near-Infrared Spectroscopy

Accurate and automated detection of surface knots on sawn timbers using YOLO-V5 model

Comparing modelling performance of chemometric methods for wood discrimination by near infrared spectroscopy

Modeling knot features using branch scars from Mongolian oak (Quercus mongolica)

Detection Method for Walnut Shell-Kernel Separation Accuracy Based on Near-Infrared Spectroscopy.

Identification of Five Similar Cinnamomum Wood Species Using Portable Near-Infrared Spectroscopy

Multivariate Modeling Dahurian Larch Plantation Wood Density Based on Near Infrared Spectroscopy

Nondestructive Detection of Moisture Content in Walnut Kernel by Near-Infrared Diffuse Reflectance Spectroscopy

Use of Visible and Near Infrared Spectroscopy to Predict Klason Lignin Content of Bamboo, Chinese Fir, Paulownia, and Poplar

Spectrometric prediction of wood basic density by comparison of different grain angles and variable selection methods

A model transfer strategy based on screening stable wavelength for quantitative analysis of holocellulose and lignin content distribution in pulpwood

Near Infrared Hyperspectral Imaging Applied to Mapping Chemical Composition in Wood Samples

The Study of Wood Knots Using Acoustic Nondestructive Testing Methods.

Prediction of basic wood properties for Norway spruce. Interpretation of Near Infrared Spectroscopy data using partial least squares regression

Visible/near-infrared hyperspectral imaging combined with machine learning for identification of ten Dalbergia species