Abstract:Ultrasonic-guided waves (GWs) have shown a high potential to be applied to the structural integrity of timber utility poles to detect and assess distinct types of defects. Yet, there are many challenges associated with this method, which may hinder its application, including the orthotropic nature of the timber, the presence of natural cracking, and the effect of environmental factors such as temperature and moisture content (MC) on the propagation of GWs. This study aims to scrutinize the effect of MCs ranging from 0 to 24%, and temperatures between − 20 and 100 °C on the propagation characteristics of GWs (longitudinal and circumferential) in cylinder timber structures excited over a range of frequencies between 10 and 20 kHz, experimentally and numerically. The numerical analysis was carried out using COMSOL Multiphysics, and Macro Fiber Composites were used to excite and sense the GWs. The anisotropic nature of timber poles was modeled using a transversely isotropic behavior. The results showed that the effect of timber's temperature and MC on the GWs should be assessed simultaneously. Three-dimensional maps were generated to present the relationship between various wave modes, temperature, and MC. The work observed a larger critical role of MC than the temperature on the propagating GWs and timber's material properties. The effect of temperature is more critical when timber's MC increases above the fiber saturation point (FSP) due to high stiffness variations. This is seen as the group velocities of the longitudinal and flexural waves (as well as the bulk wave) shifted more at MCs above FSP than below FSP. When MC varies above FSP with no temperature variations the velocity difference is negligible with 1.5% due to complete timber saturation at all temperature values. The results showed that the change in the mode velocities in dry wood is not significant with varying temperatures, as the stiffness changes by 0.07%. Experimental validation, for the numerical results, showed low differences for the bulk wave, and flexural modes were within [7.1 15]% and [1.3 4.7]% for the 2nd flexural branch at 12.5 kHz, respectively. Based on the above results, the environmental conditions can highly impact the GWs characteristics in timber structures, hence this should be carefully considered in the application phase.

Prediction Moisture Content and Strength of Wood Using Free-Space Microwave Transmission Line NDT

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

Theoretical and Experimental Study on Transient Measurement of Wood Thermal Properties

THE EFFECT OF MOISTURE CONTENT ON ELECTRICAL PROPERTIES OF SELECTED SOFTWOODS; CEDAR, JUNIPER, AND PINE

Fractal model for predicting effective thermal conductivity perpendicular to fibres of wood

A nondestructive guided wave propagation method for the characterization of moisture-dependent viscoelastic properties of wood materials

A mixed experimental–numerical electrical resistivity-based method for moisture content assessment in wood tested using the example of Douglas fir

Intra-Ring Wood Density and Dynamic Modulus of Elasticity Profiles for Black Spruce and Jack Pine from X-ray Densitometry and Ultrasonic Wave Velocity Measurement

Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing

Using Stress Wave Based Technology for Wood Material Nondestructive Testing

Species-specific prediction model of wood moisture content based on electromagnetic wave propagation time

Moisture content and strain relation in wood by Bragg grating sensor and unilateral NMR

Stress wave evaluation by accelerometer and acoustic emission sensor for thermally modified wood classification using three types of neural networks

An optimized UMR sensor for non-destructive measurements of moisture in wood

The effect of moisture content and temperature on the propagation characteristics of guided waves in timber utility poles-numerical and experimental validation

WD-1D-VGG19-FEA: An Efficient Wood Defect Elastic Modulus Predictive Model

Quantitative prediction of moisture content distribution in acetylated wood using near-infrared hyperspectral imaging

Comparison between static modulus of elasticity, non-destructive testing moduli of elasticity and stress-wave speed in white spruce and lodgepole pine wood

Research on Moisture Content Detection of Wood Components Through Wi-Fi Channel State Information and Deep Extreme Learning Machine

Three-dimensional modeling of moisture transport in wood using near-infrared hyperspectral imaging and X-ray computed tomography in conjunction with finite element analysis

A Nondestructive Indirect Approach to Long-Term Wood Moisture Monitoring Based on Electrical Methods