Abstract:Improving the thermal insulating performance of porous building material is of great practical significance for energy-efficient buildings. In this work, silica aerogels (SA) having ultralow thermal conductivity were incorporated into autoclaved aerated concrete (AAC) via physical solution impregnation method to further improving its thermal insulating performance. As expected, the addition of SA lowers the thermal conductivity of the composites and the improvement in thermal insulating performance depends on porosity of the pristine AAC. At the SA loading of similar to 7 wt.%, the highest relative improvement was found to be nearly 30%. Two types of fractal models, i.e., parallel and serial, were established to predict the thermal conductivity of the SA-AAC composites. It was observed that the serial model could match well with the experiment data of the AAC-300 and AAC-400-based composites. A hybrid model of the two types was proposed so as to predict the data for the composites more satisfactorily. This modeling effort helped us better understand the role of the impregnated SA on the heat conduction mechanisms in the composites. As an extra bonus, the compressive strength and the capillary water absorption coefficient of the composites were found to increase and decrease slightly, respectively, with increasing the SA content. The lower water absorptivity indicates a better potential durability. The results shed light on the great potential of such composites in real-world applications if the cost issue can be addressed by future advances in materials fabrication technologies.

Fractal model for predicting effective thermal conductivity perpendicular to fibres of wood

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

Experimental determination and fractal modeling of the effective thermal conductivity of autoclaved aerated concrete: Effects of moisture content

Fractal model of thermal conductivity of GA-based composite phase change material with hole sub-model

RETRACTED: A Fractal Model on Predicting the Water Vapor Permeability of Autoclave Aerated Concrete (AAC) with Various Porosities

A Fractal Model For Effective Thermal Conductivity Of Dual-Porosity Media With Randomly Distributed Tree-Like Networks

Theoretical and Experimental Study on Transient Measurement of Wood Thermal Properties

PREDICTION OF THE VERTICAL PERMEABILITY COEFFICIENT BASED ON FRACTAL THEORY FOR WOVEN SLIT-FILM GEOTEXTILES

A Fractal Model For Predicting The Effective Thermal Conductivity Of Roughened Porous Media With Microscale Effect

An experimental investigation and fractal modeling on the effective thermal conductivity of novel autoclaved aerated concrete (AAC)-based composites with silica aerogels (SA)

Predicting the effective thermal conductivity of porous building materials using improved Menger sponge fractal structure

Pore structure characterization and effective thermal conductivity modeling of fibrous building thermal insulation materials based on X-ray tomography

Heat Conduction in Porous Media Characterized by Fractal Geometry

A Novel Model For Effective Thermal Conductivity Of Tree-Like Branching Network With Fractal Roughened Surfaces

Prediction of the Effective Thermal Conductivity of Graphitic Foam Using a Fractal Model

Thermal conduction model of asymmetric structural aramid nanofiber aerogel membranes based on fractal theory

Three-dimensional modeling of moisture transport in wood using near-infrared hyperspectral imaging and X-ray computed tomography in conjunction with finite element analysis

Predicting The Electrical Conductivity Of Dual-Porosity Media With Fractal Theory

Experimental Measurements of Thermal Conductivity of Wood Species in China: Effects of Density, Temperature, and Moisture Content

Lattice Boltzmann modeling of the effective thermal conductivity for fibrous materials

Numerical Modelling of Drying Induced Cracks in Wood Discs Using the Extended Finite Element Method