Abstract:Non-autoclaved aerated concrete (NAAC) is a two-phase material with a concrete matrix and air, exhibits good thermal insulation performance and shows good potential in the insulating construction industry. In this study, recycled concrete fine powder was used as an auxiliary cementing material, and the NAAC with different porosity and distribution was fabricated by the non-autoclaved method at different curing temperatures. The effect of porosity on the thermal conductivity and mechanical strength of NAAC is analyzed by experimental tests. A prediction method of thermal conductivity combining pore structure reconstruction and numerical simulation was proposed, which is established by two steps. Firstly, the pore size distributions of NAAC with different porosities were characterized by stereology image analyses. Secondly, the thermal conductivity prediction model based on the pore structure information was established by a COMSOL steady-state heat transfer module. The thermal conductivity results of COMSOL simulations were compared with the experiments and other theoretical models to verify the reliability of the model. The model was used to evaluate the effect of porosity, pore size distribution and the concrete matrix's thermal conductivity on the thermal conductivity of NAAC; these are hard to measure when only using laboratory experiments. The results show that with the increase in curing temperature, the porosity of NAAC increases, and the number and volume proportion of macropores increase. The numerical results suggest that the error between the COMSOL simulations and the experiments was less than 10% under different porosities, which is smaller than other models and has strong reliability. The prediction accuracy of this model increases with the increase in NAAC porosity. The steady thermal conductivity of NAAC is less sensitive to the distribution and dispersion of pore size in a given porosity. With the increase in porosity, the thermal conductivity of NAAC is linearly negatively correlated with that of the concrete matrix, and the correlation is close to 1.

RETRACTED: A Fractal Model on Predicting the Water Vapor Permeability of Autoclave Aerated Concrete (AAC) with Various Porosities

Experimental determination and fractal modeling of the effective thermal conductivity of autoclaved aerated concrete: Effects of moisture content

An experimental investigation and fractal modeling on the effective thermal conductivity of novel autoclaved aerated concrete (AAC)-based composites with silica aerogels (SA)

Experimental Determination and Fractal Modeling of the Effective Thermal Conductivity of Autoclave Aerated Concrete (AAC) Impregnated with Paraffin for Improved Thermal Storage Performance

Experimental Determination of the Water Vapor Diffusion Coefficient of Autoclaved Aerated Concrete (aac) Via A Transient Method: Effects of the Porosity and Temperature

Effects of Sample Length on the Transient Measurement Results of Water Vapor Diffusion Coefficient of Porous Building Materials: A Case Study of Autoclave Aerated Concrete (AAC) with Various Porosities

Fractal model for predicting effective thermal conductivity perpendicular to fibres of wood

Thermal Conductivity of Silica-aerogel (SA) and Autoclave Aerated Concrete (AAC) Composites

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

Effective thermal conductivity of moist aerated concrete with different porosities

FRACTAL ANALYSIS OF STRESS-DEPENDENT DIFFUSIVITY OF POROUS CEMENTITIOUS MATERIALS

Simulation and Experimental Substantiation of the Thermal Properties of Non-Autoclaved Aerated Concrete with Recycled Concrete Powder

Size distribution of pores and their geometric analysis in red mud-based autoclaved aerated concrete (AAC) using regression neural network and elastic mechanics

Experimental and Modeling Investigations on the Water Sorption Behaviors of Autoclaved Aerated Concrete

Experimental Study on the Interrelationship between the Moisture Content and Drying Shrinkage of Autoclaved Aerated Concrete Wallboard

A FRACTAL-BASED APPROACH TO THE MECHANICAL PROPERTIES OF RECYCLED AGGREGATE CONCRETES

A Fractal Model For Predicting Oxygen Effective Diffusivity Of Porous Media With Rough Surfaces Under Dry And Wet Conditions

Unified Determination of Relative Molecular Diffusivity and Fluid Permeability for Partially Saturated Cement-Based Materials

Prediction of the autogenous shrinkage and microcracking of alkali-activated slag and fly ash concrete

Fractal Model for Predicting of Unsaturated Hydraulic Conductivity of Porous Media

A New Fractal Permeability Model for Porous Media Based on Rough Capillary Channels