Abstract:Non-autoclaved aerated concrete (NAAC) is a two-phase material with a concrete matrix and air, exhibits good thermal insulation performance and shows good potential in the insulating construction industry. In this study, recycled concrete fine powder was used as an auxiliary cementing material, and the NAAC with different porosity and distribution was fabricated by the non-autoclaved method at different curing temperatures. The effect of porosity on the thermal conductivity and mechanical strength of NAAC is analyzed by experimental tests. A prediction method of thermal conductivity combining pore structure reconstruction and numerical simulation was proposed, which is established by two steps. Firstly, the pore size distributions of NAAC with different porosities were characterized by stereology image analyses. Secondly, the thermal conductivity prediction model based on the pore structure information was established by a COMSOL steady-state heat transfer module. The thermal conductivity results of COMSOL simulations were compared with the experiments and other theoretical models to verify the reliability of the model. The model was used to evaluate the effect of porosity, pore size distribution and the concrete matrix's thermal conductivity on the thermal conductivity of NAAC; these are hard to measure when only using laboratory experiments. The results show that with the increase in curing temperature, the porosity of NAAC increases, and the number and volume proportion of macropores increase. The numerical results suggest that the error between the COMSOL simulations and the experiments was less than 10% under different porosities, which is smaller than other models and has strong reliability. The prediction accuracy of this model increases with the increase in NAAC porosity. The steady thermal conductivity of NAAC is less sensitive to the distribution and dispersion of pore size in a given porosity. With the increase in porosity, the thermal conductivity of NAAC is linearly negatively correlated with that of the concrete matrix, and the correlation is close to 1.

Effective thermal conductivity of moist aerated concrete with different porosities

Experimental determination and fractal modeling of the effective thermal conductivity of autoclaved aerated concrete: Effects of moisture content

Experimental Determination of the Water Vapor Diffusion Coefficient of Autoclaved Aerated Concrete (aac) Via A Transient Method: Effects of the Porosity and Temperature

Effects of Sample Length on the Transient Measurement Results of Water Vapor Diffusion Coefficient of Porous Building Materials: A Case Study of Autoclave Aerated Concrete (AAC) with Various Porosities

Thermal Conductivity of Silica-aerogel (SA) and Autoclave Aerated Concrete (AAC) Composites

Experimental Determination and Fractal Modeling of the Effective Thermal Conductivity of Autoclave Aerated Concrete (AAC) Impregnated with Paraffin for Improved Thermal Storage Performance

An experimental investigation and fractal modeling on the effective thermal conductivity of novel autoclaved aerated concrete (AAC)-based composites with silica aerogels (SA)

Thermal Conductivity of Aerated Concrete (AC) Composites Containing Micro-Encapsulated Phase Change Materials

EFFECT OF MASONRY MORTAR ON THERMAL INSULATION OF AAC MASONRY

RETRACTED: A Fractal Model on Predicting the Water Vapor Permeability of Autoclave Aerated Concrete (AAC) with Various Porosities

Effect of sample size on transient measurement of water vapor diffusion coefficient

Effect of Pore Structure on Thermal Conductivity and Mechanical Properties of Autoclaved Aerated Concrete

Simulation and Experimental Substantiation of the Thermal Properties of Non-Autoclaved Aerated Concrete with Recycled Concrete Powder

Experimental and Modeling Investigations on the Water Sorption Behaviors of Autoclaved Aerated Concrete

The influence of measurement conditions on the determined values of thermal parameters of different types of concrete

Investigation of moisture condition and Autoclam sensitivity on air permeability measurements for both normal concrete and high performance concrete

Automatic Image Analysis Method as a Tool to Evaluate the Anisotropy of Autoclaved Aerated Concrete for Moisture and Heat Transport

Effect of Nano CaCO3 on the Properties of Autoclaved Aerated Concrete

Study on the preparation and performances analysis of lightweight high strength ceramsite aerated concrete

Experimental investigation on the deterioration of the physical and mechanical properties of autoclaved aerated concrete at elevated temperatures

Experimental study on hygrothermal properties of recycled aggregate concrete