Abstract:With the premise of investigating mechanical properties, the thermal conductivity of autoclaved aerated concrete (AAC) is a key index of self-insulation block walls for building energy conservation. This study focused on the effect of pore structures on the mechanical performance and thermal conductivity of AAC with the comparison of AAC base materials. Different kinds of AAC and their base materials were prepared and experimentally investigated. While maintaining a consistent mix proportion of the AAC base material, the pore structure of AAC was changed by the dosage of aluminum power/paste, foam stabilizer, and varying the stirring time of aluminum paste. The steam curing systems of AAC and the base material were determined based on SEM (Scanning Electronic Microscopy) and XRD (X-ray Diffraction) tests. With almost the same apparent density, the pore size decreased with the increasing content of foam stabilizer, and the mixing time of aluminum paste and foam stabilizer has a great influence on pore size. The thermal conductivity test and compressive test results indicated that that pore size had an effect on the thermal conductivity, but it had little effect on the compressive strength, and the thermal conductivity of sand aeration AAC was 8.3% higher than that of fly ash aeration AAC; the compressive strength was 10.4% higher, too. With almost the same apparent density, the regression mathematical model indicates that the thermal conductivity of AAC increased gradually with the increase of pore size, but it had little effect on the compressive strength. From the test results of basic mechanical properties, the mechanical model of cubic compressive strength, elastic modulus, axial compressive strength, and splitting tensile strength was obtained. The proposed stress–strain relationship model could well describe the relationship of AAC and the base material at the rising section of the curve.

EFFECT OF MASONRY MORTAR ON THERMAL INSULATION OF AAC MASONRY

Effect of testing method on experimental result of thermal insulation mortar and system

Experimental determination and fractal modeling of the effective thermal conductivity of autoclaved aerated concrete: Effects of moisture content

Effect of waterproof agent on performance of inorganic lightweight aggregate thermal insulating mortar

Experimental Study on Mechanical Properties of Basalt Fiber-Clay Lime Mortar and Application in Brick Masonry

An experimental investigation and fractal modeling on the effective thermal conductivity of novel autoclaved aerated concrete (AAC)-based composites with silica aerogels (SA)

Experimental Determination and Fractal Modeling of the Effective Thermal Conductivity of Autoclave Aerated Concrete (AAC) Impregnated with Paraffin for Improved Thermal Storage Performance

Thermal Conductivity of Silica-aerogel (SA) and Autoclave Aerated Concrete (AAC) Composites

The Study on the Influence of Elastic Modulus of Insulation Mortar on Temperature Stress of Composite Self-Heat-conserving Wall

Effect of Pore Structure on Thermal Conductivity and Mechanical Properties of Autoclaved Aerated Concrete

Effective thermal conductivity of moist aerated concrete with different porosities

Performance of Alkali-Activated Cementitious Composite Mortar Used for Insulating Walls

Research of the combined effects by temperature action and the loads on the block masonry structure

Temperature field of masonry structure considering solar radiation

Experimental Study on Basic Mechanical Properties of Core-Column Non-mortar Aerated Concrete Block Masonry

Experimental Investigation of Bond strength Autoclaved Aerated Concrete (AAC) Masonry

Numerical Analysis on Thermal Behavior of Composite Wall Combined Autoclaved Aerated Concrete With Thermal Insulting Material in Summer Day

Improving the thermal and mechanical performance of cement-based mortars for reinforcing masonry structures: computational and experimental methods

Experimental investigation on the mechanical behaviour of AAC blocks for sustainable concrete masonry

On the Seismic Performance of Autoclaved Aerated Concrete Self-Insulation Block Walls

Finite Element Study on the Shear Capacity of Traditional Joints between Walls Made of AAC Masonry Units