Abstract:In engineering practice, similar surface insulation measures are typically applied to different parts of mass concrete surfaces. However, this can lead to cracking at the edges of the concrete surface or the wastage of insulation materials. In comparison to flat surfaces, the edges of mass concrete structures dissipate heat more rapidly, leading to more pronounced stress concentration phenomena. Therefore, reinforced insulation measures are necessary. To reduce energy consumption and enhance overall insulation effectiveness, it is essential to study the specific insulation requirements of both the flat surfaces and edges of concrete separately and implement targeted surface insulation measures. Taking the bridge abutment planned for pouring in Nanjing City as the research object, this study established a finite element model to explore the effects of different ambient temperatures and different surface heat dissipation coefficients on the early-age temperature and stress fields of different parts of the abutment's surface. Based on simulation results, reasonable heat dissipation coefficients that meet the requirements for crack prevention on both the structure's plane and edges under different ambient temperatures were obtained. The results indicate that under the same conditions, the reasonable heat dissipation coefficient at the edges was smaller than that on the flat surfaces, indicating the need for stronger insulation measures at the edges. Finally, mathematical models correlating ambient temperature with reasonable heat dissipation coefficients for the structure's plane and edges at these temperatures were established, with high data correlation and determination coefficients (R2) of 0.95 and 0.92. The mathematical models were validated, and the results from finite element calculations were found to be consistent with those from the mathematical models, validating the accuracy of the mathematical models. The conclusions drawn can provide references for the insulation of similar engineering concrete planes and edges.

Research of the combined effects by temperature action and the loads on the block masonry structure

TEMPERATURE EFFECT ON BEHAVIOURS OF SINGLE-BRACED RETAINING STRUCTURE OF DEEP EXCAVATION

EFFECT OF MASONRY MORTAR ON THERMAL INSULATION OF AAC MASONRY

Research on Crack-Resisting Construction Design Method of Concrete Small Cavity Block Building Based on Temperature Effect

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Temperature field of masonry structure considering solar radiation

Influence of Load Partial Factors Adjustment on Design of Masonry Structures

Research on Site Tracing Monitoring of Temperature Field of Concrete Small Hollow Block Building

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

Relationship between Ambient Temperature and Reasonable Heat Dissipation Coefficient of Mass Concrete Pouring Blocks

The Study on the Influence of Elastic Modulus of Insulation Mortar on Temperature Stress of Composite Self-Heat-conserving Wall

State-of-the-art Development on ‘code for Design of Masonry Structures’

Experimental Research on Grouted Concrete Block Masonry's Constitutive Law under Plain Stress State

Effect of Thermal Parameters on Hydration Heat Temperature and Thermal Stress of Mass Concrete

Finite element analysis of masonry structure based on micro-model

Experimental Study of Anisotropic Strength Characteristics of Grouted Concrete Block Masonry

Numerical simulation of temperature field and temperature stress of mass concrete based on ANSYS

Performance of Concrete Structure after Fire Disaster Based on Thermal Stress Coupling Field Analysis

Field Test and Numerical Simulation of the Thermal Insulation Effect of Concrete Pouring Block Surface Based on DTS

Mass Concrete Placement Block Temperature and Stress Field Simulation of the Direct Coupling Method

EXPERIMENTAL STUDY ON BASIC MECHANICAL BEHAVIOR OF A NEW TYPE CONCRETE HORIZONTAL-HOLE HOLLOW BLOCK MASONRY