Abstract:Poplar is one of the main fast-growing species in China. In this study, the Italian poplar is used in the manufacturing of engineered wood materials, such as glued laminated timber (glulam), laminated veneer lumber (LVL), etc. The overall objective is to take full advantage of the fast-growing species in China and make it applicable to modern timber structures. Firstly, through a series of material mechanical testing, the main physical and mechanical behavior of glulam and LVL were presented. Based on this, experimental study on a total of 31 engineered wood beams was developed and the failure modes and failure mechanism were analyzed in this paper. Then the flexural behaviors, which include load carrying capacity and bending stiffness, were investigated and made a detailed comparison among them. Finally, the influences of lamination combination, load direction, veneer thickness (for LVL members), and beam sizes upon the flexural behaviors of engineered wood beams were discussed. Experimental results have shown that structural behaviors of engineered wood beams were much better than those of sawn beams made from ordinary structural timber. For example, the ultimate load of poplar engineered wood beams exceeds that of sawn Mongolian Scotch pine (MSP) beams by 39.0%similar to 90.0%, while bending stiffness increased by 35.0%similar to 45.0%. When combining LVL with glulam in the beams, they would produce better structural performance. Also the average strain of beam cross-section showed a linear distribution, and the ultimate tensile strain of the beams is 0.006 while the maximum compressive strain of the beams is about 0.009. Moreover, the influences of lamination combination and beam sizes on the beam's flexural behavior are obvious. From this study, it shows that engineered wood materials have a good prospect in building structures of China.

Experimental study on the flexural behaviour of engineered wood composite beams

Study On Material And Structural Behaviors Of Engineered Wood Composite Beams

Study on flexural behaviour of a novel wood composite beam

Experimental Study On Flexural Behavior Of Glulam And Laminated Veneer Lumber Beams

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

Flexural Fatigue Study of Glubam Beams

Experimental investigation on shear behavior of full-scale glued laminated bamboo beams under three-point loading test and using digital image correlation technique

Study on flexural behavior of FRP reinforced glulam beams

Combinatorial design and flexural behavior of laminated bamboo–timber composite beams

Experimental and nonlinear analytical of the flexural performance of timber-filled steel tubular composite beams

Flexural behaviour of built-up I-shaped bamboo scrimber beams: experimental tests and design method

Flexural responses and pseudo-ductile performance of lattice-web reinforced GFRP-wood sandwich beams

Flexural Behavior of Frp and Steel Reinforced Glulam Beams: Experimental and Theoretical Evaluation

The Flexural Behaviour of Composite Sandwich Beams with a Lattice-Web Reinforced Wood Core

Study on Flexural Behaviour of Glulam Beams Reinforced by Near Surface Mounted (NSM) CFRP Laminates

Bending Performance of GFRP-wood Sandwich Beams with Lattice-Web Reinforcement in Flatwise and Sidewise Directions

Shear Behavior of I-shaped Wood-Steel Composite Beam

Flexural behaviors of GFRP-wood sandwich beams with recycled wood formwork cores

Analysis Study on Flexural Deflection of FRP Reinforced Glulam Beams

Flax, Basalt, E-Glass FRP and Their Hybrid FRP Strengthened Wood Beams: An Experimental Study

Experimental Analysis of Bending Resistance of Bamboo Composite I-Shaped Beam