Abstract:The characteristics of geotechnical engineering related structure such as tunnels, foundations and retaining walls are as follows: (1) The structure is normally buried underground and visual inspection of the health condition is not possible in most cases. (2) Due to the complicated geological and hydrological conditions, a number of uncertainties are involved in the design and construction of geotechnical structures. (3) Some of the geotechnical structures are super long and large. Therefore, the requirements of real-time and long-distance monitoring of these geo-structures are of great importance. Some key geo-structures such as large-span tunnel, underground facilities and foundations require the measurement accuracy in the order of micron or millimeter. Hence the conventional monitoring techniques cannot meet the demands for geo-structure health monitoring.Brilliouin Optical Time Domain Reflectometry/Analysis (BOTDR/A) is a fully distributed measurement technique, which utilizes Brilliouin spectroscopy and Optical Time Domain Reflectometer/Analyzer to measure strains generated in optical fibers as distributed in the longitudinal direction. Fiber Bragg Grating (FBG) is a qusai-distributed monitoring technique, which is a type of distributed Bragg reflector constructed in a short segment of optical fiber that reflects particular wavelengths of light and transmits all others. The reflected wavelength is proportional to the applied strain and temperature and the FBG sensor can therefore be used as a strain or temperature sensor. Because of the distinctive characteristics of the distributed optical fiber sensing technologies, they have been paid more and more attention and began to be used to construct monitoring systems of various geo-structures such as tunnels, embankments and soil nailed slopes. In this paper, the operation principles and merits of BOTDR/A and FBG are introduced; their application feasibility on the geo-structure health monitoring are analyzed based on the authors' research achievements and application cases; the related topics about application of BOTDR/A and FBG are discussed in detail, which include the installation methods of optical fiber, the impact of distance, temperature and humidity resolution on measurement results, the fatigue effect of optical fiber, the conversion from strain to deformation and the establishment of intelligent monitoring system. The research results show that the distributed optical fiber sensing technologies are quite applicable to the geo-structure health monitoring.

Novel fiber Bragg Grating-based strain gauges for monitoring dynamic responses of Celtis sinensis under typhoon conditions

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

Deformation monitoring and features study for ancient wooden building under typhoon action

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Derrick Stress Monitoring System Based On Fiber Bragg Grating Sensor Technology

Measuring geo-grids stress using distributed fiber-optic sensors based on pulse-prepump-Brillouin optical time domain analysis

Deformation Monitoring for Chinese Traditional Timber Buildings Using Fiber Bragg Grating Sensors

Design and application of a fiber Bragg grating strain sensor with enhanced sensitivity in the small-scale dam model

Ground Movement Monitoring Using an Optic Fiber Bragg Grating Sensored System

Fiber Bragg Grating-Based Performance Monitoring of A Slope Model Subjected to Seepage

Application of Distributed Optical Fiber Strain Measurement into Geotechnical Engineering Monitoring

An Optical Fibre Monitoring System for Evaluating the Performance of a Soil Nailed Slope

Feasibility Study of Anchored Fiber-Optic Strain-Sensing Arrays for Monitoring Soil Deformation Beneath Model Foundation

Fiber Bragg Grating Sensors for Pile Jacking Monitoring in Clay Soil

A New Flexible FBG Sensing Beam for Measuring Dynamic Lateral Displacements of Soil in a Shaking Table Test

A Novel Effective Stress Sensor Based on FBG Sensing Technology for Effective Stress Measurement in Soil

Online Monitoring of Anti-Slide Piles by Using Fiber Bragg Grating Soil Pressure Sensor

Geologic Monitoring of Transformer Substation by Two-Diaphragm Fiber Bragg Grating Earth Pressure Sensor

Damage Detection in FRP Structures Using Fiber Bragg Grating Dynamic Strain Sensing Systems