Abstract:A detailed micromechanical finite element analysis methodology is presented to predict the transverse tensile (fiber perpendicular) failure behavior of a unidirectional (UD) glass fiber-reinforced plastic composite ply. In order to understand the constituent-level stress–strain and damage behavior, finite element analysis is accomplished using representative volume element (RVE) that consists of random fiber distribution as observed in the microscopic image of an actual composite ply. For modeling the fiber/matrix interface failure behavior, cohesive zone module (cohesive surface/cohesive element) of Abaqus® is used. In order to capture the epoxy matrix stiffness and strength degradation, the following two different approaches are used: (i) initially, the linear Drucker–Prager plasticity model in combination with a ductile fracture criterion is used; (ii) later, a brittle failure approach such as the quadratic normal stress criterion within the framework of eXtended finite element method is used. From the detailed micromechanical analysis of the RVE, it is observed that the initial damage in the RVE occurs in the form of fiber/matrix interface decohesion. With increasing tensile load, interface crack propagates and creates a stress concentration region in the matrix material, adjacent to the crack tip. Further load application causes both interface crack tip and matrix stress concentration to move away from the load application direction. As soon as the interface crack tip reaches approximately 60° to 70° away from the load application direction, the conjunction of the matrix damage with the interface crack leads to the RVE final failure. The predicted average stress–strain curves from the above-mentioned two different epoxy matrix failure criterions (ductile and brittle) correlate very well with the experimental results, indicating that the brittle failure behavior of a UD fiber-reinforced plastic composite ply under transverse tensile load is mainly controlled by the fiber/matrix interface properties.

Effect of the Yield Criterion of Matrix on the Brittle Fracture of Fibres in Uniaxial Tension of Composites

Micro Failure Analysis of Fiber Metal Laminates

The mechanics of matrix cracking in brittle-matrix fiber composites

THE THEORITICAL RESEARCH IN THE YIELDING BEHAVIOUR OF TENSILE DEFORMATION IN SHORT FIBER REINFORCED METAL MATRIX COMPOSITE

Effect of Fiber Extensibility on the Fracture Toughness of Short Fiber or Brittle Matrix Composites

Application of a linear elastic - brittle interface model to the crack initiation and propagation at fibre-matrix interface under biaxial transverse loads

Effects of Geometrical and Mechanical Properties of Fiber and Matrix on Composite Fracture Toughness

Design Criteria for Pseudoductile Fiber-Reinforced Composites

Effect of thermal residual stresses on yielding behavior under tensile or compressive loading of short fiber reinforced metal matrix composite

Biaxial Yield Surface Investigation of Polymer-Matrix Composites

Computational micromechanical modeling of transverse tensile damage behavior in unidirectional glass fiber-reinforced plastic composite plies: Ductile versus brittle fracture mechanics approach

Multiple Cracking of Fiber/Matrix Composites - Analysis of Normal Extension

Influence of statistical fiber strength distribution on matrix cracking in fiber composites

A Microscopic Dynamic Monte Carlo Simulation for Unidirectional Fiber Reinforced Metal Matrix Composites

Steady-state and multiple cracking of short random fiber composites

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading

Dependence of Initial Stress–strain Behavior on Matrix Plastic Inhomogeneity in Short Fiber-Reinforced Metal Matrix Composite

Investigation of the Effect of Microstructural Parameters on the Initial Yield Surface of Non-Isothermal Composites

A Note On The Monte-Carlo Simulation Of The Tensile Deformation And Failure Process Of Unidirectional Composites

Fatigue accumulated damage in notched quasi-isotropic composites under high-temperature conditions: A discussion on the influence of matrix nature on the stress energy release rate