Abstract:The failure of fiber-reinforced ceramic and metal matrix composites under a fixed load for extended times occurs because of strength degradation in the constituent fibers. Specifically, the ceramic fibers possess a Weibull strength distribution caused by crack-like flaws, which can grow according to a power-law growth mechanism. Failure of individual fibers causes interfacial slippage and stress redistribution to unfailed fibers, which in turn accelerates the degradation rate of the remaining fibers, and culminates in abrupt failure of the composite after sufficient damage has accumulated. This sequence of events is modeled both analytically and numerically within the Global Load Sharing (GLS) approximation previously utilized for quasi-static loading. Analytically, a general constitutive model for the relationship between the stress on the damaged fiber bundle, the strain in the unbroken fibers, and the extent of damage, is combined with a time-dependent damage evolution equation derived from the slow-crack-growth kinetics to yield an integral equation for the strain vs time at fixed applied load. The relevant gauge length for a fixed-load rupture process is found to be δ = rστ which is twice the slip length prevailing at the initial applied load σ, where τ is the interfacial sliding resistance between fiber and matrix. The underlying time scale for rupture is the time scale for a typical fiber of gauge length δ to fail under the applied load σ; this time can be quite different from that measured by stress-rupture tests on single fibers at an unrelated laboratory gauge length L0. A simple, accurate but approximate relationship between applied load, time to failure, fiber Weibull modulus, and slow crack growth exponent is presented. The numerical simulations of the same degradation process verify the general accuracy of the failure time obtained from the analytic results. The remaining tensile strength after some time at load but prior to failure is also studied, and the simulation results generally exhibited a more sudden-death failure than the analytical predictions. A specific application to the failure of a Nicalon fiber composite is presented.

Design Criteria for Pseudoductile Fiber-Reinforced Composites

Design Criteria for Pseudoductile Fiber-Reinforced Composites

Steady-state and multiple cracking of short random fiber composites

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Fracture Toughness Micromechanics by Energy Methods With a Photocure Fiber-Reinforced Composite

Effect of Fiber Extensibility on the Fracture Toughness of Short Fiber or Brittle Matrix Composites

Bridging Toughening and Fracture Energy of X-Type Fiber Reinforced Cementitious Composites

A theoretical and experimental assessment of 3D macroscopic failure criteria for predicting pure inter-fiber fracture of transversely isotropic UD composites

A 3D Micromechanics-Based Failure Criterion for Fiber Reinforced Composites under Longitudinal Compression

Assessing pseudo-ductile behavior of woven thermoplastic composites under tension and bending

Mode I fracture toughness of fiber-reinforced polymer composites: A review

Bilinear Softening Model and Double K Fracture Criterion for Quasi-Brittle Fracture of Pultruded FRP Composites

Computational micromechanical modeling of transverse tensile damage behavior in unidirectional glass fiber-reinforced plastic composite plies: Ductile versus brittle fracture mechanics approach

The mechanics of matrix cracking in brittle-matrix fiber composites

Failure Criteria for Brittle Notched Specimens

Time-dependent failure in fiber-reinforced composites by fiber degradation

Fracture toughness and fiber bridging mechanism for mode-I interlaminar failure of spread-tow woven composites

High Performance Ductile and Pseudo-ductile Polymer Matrix Composites: a Review

Essential Work of Fracture Analysis for Surface Modified Carbon Fiber/polypropylene Composites with Different Interfacial Adhesion