Abstract:Herein, a series of ternary to quinary eutectic alloys in the Co–Cr–Fe–Ni–Nb alloy system are designed/located following the simple mixing strategy based on the Ni–Nb, Co–Nb, Cr–Nb, Fe–Nb binary phase diagrams. The designed NiFeNb0.35, CoFeNiNb0.5, CoCrFeNiNb0.45 eutectic alloys are prepared. The phase formation, microstructure evolution, and mechanical properties of the eutectic alloys are studied. All of these designed eutectic alloys are composed of Nb‐rich intermetallic compound phase and Nb‐poor face‐centered cubic (Fcc) phase. However, these eutectic alloys show different eutectic morphology. The FeNiNb0.35 alloy exhibits a compact seaweed eutectic‐dendritic pattern. The CoFeNiNb0.5 alloy shows dendritic eutectic morphology. The CoCrFeNiNb0.45 alloy exhibits eutectic cell morphology. Mechanical tests results indicate that the NiFeNb0.35, CoFeNiNb0.5, CoCrFeNiNb0.45 alloys have higher Vickers hardness and strength. Wherein, the CoCrFeNiNb0.45 alloy is found to combine the best comprehensive mechanical properties with yield strength of 1316 MPa, fracture strength of 2339 MPa, compressive strain of 24.2%, fracture toughness of 18.4 MPa m1/2, and Vickers hardness of 511 HV. The solid solution strengthening of the FCC phase and the hard intermetallic phase strengthening are the major strength mechanism in this eutectic alloys. The NiFeNb0.35, CoFeNiNb0.5, CoCrFeNiNb0.45 eutectic high entropy alloys are successfully designed/located following simple mixing strategy based on the Ni–Nb, Co–Nb, Cr–Nb, Fe–Nb binary phase diagrams. Among these eutectic alloys, the CoCrFeNiNb0.45 quinary alloy shows the best comprehensive mechanical properties with yield strength of 1316 MPa, fracture strength of 2339 MPa, compressive plastic of 24.2%, and Vickers hardness of 511 HV.

Composition design, microstructure, and mechanical properties of novel Ti–Co–Ni–Zr complex concentrated alloys

Composition design, microstructure and mechanical properties of novel multiphase Ti–Cu–Ni–Nb complex concentrated alloys

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Microstructure Evolution and Strengthening Mechanisms of Cast Al–Cu–Mn Alloy via Ti–Zr-Synergistic Micro-alloying

Microstructure and properties of a novel ultra-high strength, high elasticity and high plasticity Cu–20Ni–20Mn-0.3Nb-0.3Cr-0.1Zr alloy

Superior tensile properties of a novel as-cast non-equimolar Zr45Ti15Nb20Ta20 complex concentrated alloy

Design Multicomponent Eutectic Alloys in the Co–Cr–Fe–Ni–Nb System Using Simple Mixing Method

Achieving high strength in dual-phase Ti-6.4Al-4.4Mo-2.1Zr-0.6Si alloy using cluster formula design

Effect of Aluminum, Iron and Chromium Alloying on the Structure and Mechanical Properties of (Ti-Ni)-(Cu-Zr) Crystalline/Amorphous Composite Materials

Novel as-cast Ti-rich refractory complex concentrated alloys with superior tensile properties

Microstructural features and excellent compression properties of a novel Al0.7CoCrFeNiTi0.3 high entropy alloy

A new insight into high-strength Ti 62 Nb 12.2 Fe 13.6 Co 6.4 Al 5.8 alloys with bimodal microstructure fabricated by semi-solid sintering

Fabrication and characterization of W/Cu/Ni-based high specific gravity alloy with Zr and Ti combined addition

Design and microstructural development of a new eutectic Fe-Co-Ni-B multi-principal element alloy system

Accelerating design of novel Cobalt‐based superalloys based on first-principles calculations

Designing ultra-strong and ductile hierarchical titanium alloys via interstitial solute-mediated multi-morphologic α-nanoprecipitates

Experimental Study on Phase Relationships in the Co-rich Portion of the Co–Ti–Zr System

Improving the Microstructure and Mechanical Properties of Zr-Ti Alloy by Nickel Addition

Effect of combined addition of Zr, Ti and Y on microstructure and tensile properties of an Al-Zn-Mg-Cu alloy

Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework

Novel Co-free ferrous multicomponent alloys containing L12 particles with high density and heterogeneous distribution