Abstract:Herein, a series of ternary to quinary eutectic alloys in the Co–Cr–Fe–Ni–Nb alloy system are designed/located following the simple mixing strategy based on the Ni–Nb, Co–Nb, Cr–Nb, Fe–Nb binary phase diagrams. The designed NiFeNb0.35, CoFeNiNb0.5, CoCrFeNiNb0.45 eutectic alloys are prepared. The phase formation, microstructure evolution, and mechanical properties of the eutectic alloys are studied. All of these designed eutectic alloys are composed of Nb‐rich intermetallic compound phase and Nb‐poor face‐centered cubic (Fcc) phase. However, these eutectic alloys show different eutectic morphology. The FeNiNb0.35 alloy exhibits a compact seaweed eutectic‐dendritic pattern. The CoFeNiNb0.5 alloy shows dendritic eutectic morphology. The CoCrFeNiNb0.45 alloy exhibits eutectic cell morphology. Mechanical tests results indicate that the NiFeNb0.35, CoFeNiNb0.5, CoCrFeNiNb0.45 alloys have higher Vickers hardness and strength. Wherein, the CoCrFeNiNb0.45 alloy is found to combine the best comprehensive mechanical properties with yield strength of 1316 MPa, fracture strength of 2339 MPa, compressive strain of 24.2%, fracture toughness of 18.4 MPa m1/2, and Vickers hardness of 511 HV. The solid solution strengthening of the FCC phase and the hard intermetallic phase strengthening are the major strength mechanism in this eutectic alloys. The NiFeNb0.35, CoFeNiNb0.5, CoCrFeNiNb0.45 eutectic high entropy alloys are successfully designed/located following simple mixing strategy based on the Ni–Nb, Co–Nb, Cr–Nb, Fe–Nb binary phase diagrams. Among these eutectic alloys, the CoCrFeNiNb0.45 quinary alloy shows the best comprehensive mechanical properties with yield strength of 1316 MPa, fracture strength of 2339 MPa, compressive plastic of 24.2%, and Vickers hardness of 511 HV.

Composition design, microstructure and mechanical properties of novel multiphase Ti–Cu–Ni–Nb complex concentrated alloys

Composition design, microstructure, and mechanical properties of novel Ti–Co–Ni–Zr complex concentrated alloys

Design Multicomponent Eutectic Alloys in the Co–Cr–Fe–Ni–Nb System Using Simple Mixing Method

Mechanical behaviors of novel multiple principal elements CuAl10Fe5Ni5Mn1.2 wt% with micro-nano structures

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

The microstructure and mechanical properties of novel Fe-rich Fe-Cr-Ni-Ta eutectic multi-principal element alloys

Peritectic Solidification Kinetics and Mechanical Property Enhancement in a Rapidly Solidified Ti–48 at% Al–8 at% Nb Alloy via Hierarchical Twin Microstructure

Design and microstructural development of a new eutectic Fe-Co-Ni-B multi-principal element alloy system

Microstructural evolution and mechanical properties of novel nanoparticles strengthened CoCrFeNi based high entropy alloy

Microstructure and mechanical properties variation with Ni content in Al0.8CoCr0.6Fe0.7Nix (x = 1.1, 1.5, 1.8, 2.0) eutectic high-entropy alloy system

Multi-principal Element Alloys with High-density Nanotwinned 9R Phase

Microstructure and properties of a novel ultra-high strength, high elasticity and high plasticity Cu–20Ni–20Mn-0.3Nb-0.3Cr-0.1Zr alloy

Investigation of a novel CuFeNiTiV high entropy alloy on phase component, microstructure and mechanical properties

A new insight into high-strength Ti 62 Nb 12.2 Fe 13.6 Co 6.4 Al 5.8 alloys with bimodal microstructure fabricated by semi-solid sintering

Improving the ductility of high-strength multiphase NiAl alloys by introducing multiscale high-entropy phases and martensitic transformation

Designing ultra-strong and ductile hierarchical titanium alloys via interstitial solute-mediated multi-morphologic α-nanoprecipitates

Influences of Ti additions on the microstructure and tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy

Novel Co-free ferrous multicomponent alloys containing L12 particles with high density and heterogeneous distribution

Microstructure evolution and strengthening mechanisms in Ni36Co30Cr11Fe11Al12-xNbx high entropy alloys

Designing novel AlCoCrNi eutectic high entropy alloys

Casting microstructure and phase-specific deformation behavior of Ti–20Ni alloy containing Ti 2 Ni phase