Abstract:This work fabricated a series of microstructures consisting of different equiaxed α (α eq ) and β phase contents to investigated the effect of phase content on mechanical properties and deformation mechanism, including slip initiation, slip transfer, stress-induced martensite (SIM) and crack nucleation of TC21 titanium alloy. The results show that, with the decrease of α eq phase content, the YS of the alloy firstly decreases and then increases, the UTS gradually increases, and the EL gradually decreases. The significant variation of mechanical properties is closely related to the deformation mechanism of microstructures with different α eq phase contents. In sample with high α eq phase content, α eq phase is deformed by slip prior to β phase, and with the increase of strain, β phase can coordinate deformation by slip initiation and exhibits a better ability to coordinate plastic deformation. In samples with medium α eq phase content, the stability of β phase decreases, slip in α eq grain and SIM in β grain can be initiated simultaneously. However, the formation of SIM would harden β phase, and with the increase of strain, it would restrain the ability of β phase to further coordinate plastic deformation. In samples with low α eq phase content, the stability of β phase decreases sharply, which could induce the precipitation of fine-lamellar secondary α (α s ) and acicular martensite α'' in β grain during annealing. These precipitated α s and α'' can not only inhibit the formation of SIM, but also dramatically reduce the ability of β phase to coordinate plastic deformation. Meanwhile, the evolution of deformation mechanism in different samples can significantly influence the crack nucleation location (slip band or α eq /β interface) during deformation. This paper analyzes in detail the effect of α eq phase content on mechanical properties of TC21 titanium alloy based on deformation mechanism, it would contribute to the establishment of a relationship among phase content, deformation mechanism and mechanical properties.

Casting microstructure and phase-specific deformation behavior of Ti–20Ni alloy containing Ti 2 Ni phase

Microstructure evolution and reactive diffusion behavior of highly dense TiNi alloy prepared from Ti 2 Ni and TiNi 3 intermetallic compound powders

Microstructure evolution and mechanical properties of TC4/Ni metallic-intermetallic laminated composites: Formation and strengthening effects of Ti2Ni phases

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Anomalous hot deformation behavior and microstructure evolution of as-cast martensitic NiTi alloy during hot compression

Microstructural Evolution and Deformation Micromechanism of Cold-Deformed TiNi-Based Alloys

Composition design, microstructure and mechanical properties of novel multiphase Ti–Cu–Ni–Nb complex concentrated alloys

A Newly Generated Nearly Lamellar Microstructure in Cast Ti-48Al-2Nb-2Cr Alloy for High-Temperature Strengthening

Effect of phase content on mechanical properties and deformation mechanism in TC21 titanium alloy: An in-situ tensile investigation

Tribology behaviors of Ti–Ni51.5 at% shape memory alloy with different microstructures and textures

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

Their Printing, Homogenization and Densification

Phase constitution, microstructure and mechanical properties of a Ni-based superalloy specially designed for additive manufacturing

The Enhancement Effect of Carbides on the Printability and Mechanical Properties of a Ni–Fe–Cr–Al–Ti Alloy Processed by Electron Beam Freeform Fabrication

Microstructures and Mechanical Behaviors of NiAlFe Intermetallic Compounds

Study of deformation micromechanism in cold-deformed TiNi based alloys

Unveiling the phase evolution and mechanical properties of Ni1.5Co1.5CrTix alloys with ultrafine/nano structure

Effect of Ti and Al on Microstructure and Partitioning Behavior of Alloying Elements in Ni-based Powder Metallurgy Superalloys

Microstructure and mechanical properties of Cu-12 Al-6 Ni with Ti addition prepared by powder metallurgy

Deformation and Phase Transformation of Disordered α Phase in the (α + γ) Two-Phase Region of a High-Nb TiAl Alloy

Ultrahigh strength and large plasticity of nanostructured Ti62Nb12.2Fe13.6Co6.4Al5.8 alloy obtained by selectively controlled micrometer-sized phases