Abstract:Conformal circuits integrate mechanical structures and electrical performance, improving the design flexibility and equipment reliability. It enables the conformal circuit a promising alternative to the traditional printed circuit boards and independent electric wires in the fields of communication devices, automotive electronics, and medical equipment. Conformal circuits can be fabricated by several techniques such as 3D printing and 3D molding interconnect device (3D-MID) fabrication technique. However, the point-by-point reconstruction of the curved surfaces and the complex configuration of the equipment significantly reduce the efficiency and the cost effectiveness. The small thicknesses and sizes of the conductive layers fabricated by these techniques limit the application of the conformal circuits in the high current circuits. In this paper, a thick-film conformal circuit forming method based on the surface partitioning and the flexible frame screen printing is presented. The partitioning process divides the complex surface into finite number of subareas with generatrices of simple shapes and guide lines with single extension directions, limiting the mean curvature variations and the lengths of guide lines. In each subarea, flexible frames can be fixed along its guide lines and the screen can then be tensioned along its generatrix uniformly, ensuring the forming of circuits on the curved surfaces which cannot be achieved by the traditional screen printing with a rigid frame. The conformal circuits were fabricated on the external surface of an actual workpiece. The Gaussian curvature of the surface varied from - 2.2×10 -3 to 1.1×10 -3 mm -2 . The maximum variation of the mean curvature among all subareas after the partitioning was 0~6×10 -3 mm -1 , two orders of magnitude lower than that of the entire surface. The uniformity and the deviation of the linewidths were around ±41 μm and ±43 μm, comparable to the printed circuits on the planar surfaces. The resistivity of the printed circuits was 7.1±0.2 μΩ·cm, 29% higher than the nominal resistivity of the silver paste used as the conductive materials in this work. The results demonstrate the effectiveness of the method presented in this paper and the potential to efficiently prepare complicated conformal circuits with a high aspect ratio on curved surfaces.

Self‐Healing Kirigami Assembly Strategy for Conformal Electronics

Kirigami-Inspired Deformable 3D Structures Conformable to Curved Biological Surface.

Mechanics of Curvilinear Electronics

Printing Completely Conformal Liquid Metal Circuits on Arbitrary Curved Surfaces Via Customized Conformal Mask

Self-locking Kirigami surfaces via controlled stretching

MorphingCircuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics.

Flexible Electronics: Ultrathin Silicon Circuits with Strain‐Isolation Layers and Mesh Layouts for High‐Performance Electronics on Fabric, Vinyl, Leather, and Paper (adv. Mater. 36/2009)

A Snakeskin-Inspired, Soft-Hinge Kirigami Metamaterial for Self-Adaptive Conformal Electronic Armor

A Mechanically Driven Form Of Kirigami As A Route To 3d Mesostructures In Micro/Nanomembranes

Kirigami Design of Flexible and Conformal Tactile Sensor on Sphere‐shaped Surface for Contact Force Sensing

Self‐Healing, Reconfigurable, Thermal‐Switching, Transformative Electronics for Health Monitoring

Stretchable, Curvilinear Electronics Based on Inorganic Materials

Design Criteria for Conformal Integration of Flexible Electronics on Advanced Aircraft Surfaces

Stretchable and Foldable Silicon Integrated Circuits

Conformal Theoretical Modeling of Arbitrary Shape Flexible Electronic Sensors Mounted Onto General Curved Surface Substrates

Electric Field-Driven Jetting and Water-Assisted Transfer Printing for High-Resolution Electronics on Complex Curved Surfaces

Design of Strain-Limiting Substrate Materials for Stretchable and Flexible Electronics

Thick-film Conformal Circuit Forming Method Based on Surface Partitioning and Flexible Frame Screen Printing

Kirigami‐Inspired Stretchable Conjugated Electronics

From Kirigami to Hydrogels: A Tutorial on Designing Conformally Transformable Surfaces

Dynamically Conformal Mask Printing of Liquid Alloy Circuits on Morphing Objects