Abstract:Reinforced concrete structures experience nonlinear vibration response because of softening in concrete due to damage, which results in unstable vibration. Thus, considering the nonlinearity in vibration for assessment of damage is imperative to identify the actual damage scenario. Nonlinearity is predominant during the initial stage of damage when cracks start developing in the concrete exhibiting nonlinear breathing-crack mechanism. By suitably extracting nonlinear features from ambient/forced vibration, information on initial stage of damage (primarily breathing-crack) in large concrete structures can be obtained. In the present study, evaluation of nonlinear dynamic features from an experimental model of a reinforced concrete bridge girder-deck system is investigated. The damage scenarios in the bridge girder is experimentally simulated by monotonically applied static load at different levels. Vibration responses are acquired using the accelerometers positioned at regular intervals, so that the global system behaviour can be assessed. Damage features at various damage levels are evaluated based on the signal statistics, amplitude dependency, harmonics, phase-plane information and so on. The breathing-crack behaviour of the bridge girder during initial damage stages is investigated and the existence of sub- and super-harmonic components in the frequency spectra is distinctly evidenced and their amplitudes are quantified. The change of skewness pattern of the frequency spectra with increasing damage level is also evaluated. A distinct variation in phase space portrait is observed with increase in damage levels. It is found that, in spite of presence of inherent material nonlinearity, nonlinearity caused through system damage, even at initial stages of damage, is predominant and could be distinctly captured without any baseline information. The identified nonlinear vibration characteristics showed a remarkable relevance in detecting breathing-crack type damage in weakly nonlinear bridge. The investigated damage features from this study would pave the way for real-time baseline free assessment and identification of damage in concrete structures.

Experimental study of the nonlinear effects generated in a concrete structure with damaged integrity

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Concrete damage diagnosed using the non-classical nonlinear acoustic method

Dynamic nonlinearities for identification of the breathing crack type damage in reinforced concrete bridges

Theoretical and experimental study of the nonlinear resonance vibration of cementitious materials with an application to damage characterization

Enhancement of Contact Acoustic Nonlinearity Effect in a Concrete Beam using Ambient Vibrations

Creep Characterization of Concrete Suffering Initial Damage

To Evaluate the Degradation of Heat Damaged Concrete Specimens after Curing Using Non-Linear Ultrasound Technique

Use of Non-Linear Ultrasonic Techniques to Detect Cracks Due to Steel Corrosion in Reinforced Concrete Structures

Characterization of Corrosion-Induced Fracture in Reinforced Concrete Beams Using Electrical Potential, Ultrasound and Low-Frequency Vibration

Theoretical and Experimental Study of Nonclassical Nonlinear Acoustic Phenomena in Concrete

Damage prediction via nonlinear ultrasound: A micro-mechanical approach

The changes of the nonclassical nonlinear effect under erosion of sulfate

Modelling nonlinearity of guided ultrasonic waves in fatigued materials using a nonlinear local interaction simulation approach and a spring model

Nonclassical nonlinear sound transmission in solid with cracks

Ultrasonic Nonlinear Responses of a Closed Crack in Plate-like Structure

Nonlinear acoustics for fatigue crack detection – experimental investigations of vibro-acoustic wave modulations

Further numerical investigation on concrete dynamic behaviors with considering stress non-equilibrium in SHPB test based on the waveform features

Experimental study on the nonlinear mixing of ultrasonic waves in concrete using an array technique

Research on nonlinear response analysis of micro-cracks under vibro-acoustic modulation.

Dynamic testing of a damaged bridge