Abstract:Bridges constitute important elements of the transportation network. A vast part of the Italian existing infrastructural system dates to around 60 years ago, which implies that the related bridge structures were constructed according to past design guidelines and underwent a probable state of material deterioration (e.g., steel corrosion, concrete degradation), especially in those cases in which proper maintenance plans have not been periodically performed over the structural lifetime. Consequently, elaborating rapid yet effective safety assessment strategies for existing bridge structures represents a topical research line. This contribution presents a systematic experimental-numerical approach for assessing the load-bearing capacity of existing prestressed concrete (PC) bridge decks. This methodology is applied to the Longano PC viaduct (southern Italy) as a case study. Initially, natural frequencies and mode shapes of the bridge deck are experimentally identified from vibration data collected in situ through Operational Modal Analysis (OMA), based on which a numerical finite element (FE) model is developed and calibrated. In situ static load tests are then carried out to investigate the static deflections under maximum allowed serviceability loads, which are compared to values provided by the FE model for further validation. Since prestressing strands appear corroded in some portions of the main girders, numerical static nonlinear analysis with a concentrated plasticity approach is finally conducted to quantify the effects of various corrosion scenarios on the resulting load-bearing capacity of the bridge at ultimate limit states. The proposed methodology, encompassing both serviceability and ultimate conditions, can be used to identify critical parts of a large infrastructure network prior to performing widespread and expensive material test campaigns, to gain preliminary insight on the structural health of existing bridges and to plan a priority list of possible repairing actions in a reasonable, safe, and costly effective manner.

Dynamic testing of a damaged bridge

Field Destructive Testing of a Reinforced Concrete Bridge Deck Slab

Damage Identification in Warren Truss Bridges by Two Different Time–Frequency Algorithms

Dynamic evaluation for simply supported reinforced concrete beam with considering the influence of overload

Bridge load testing and damage evaluation using model updating method

Non-modal vibration-based methods for bridge damage identification

Vibration-Based Damage Detection of a Steel-Concrete Composite Slab Using Non-Model-Based and Model-Based Methods

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Wireless vibration testing and bridge deck damage identification using underneath maintenance walkway

A Combined Experimental-Numerical Framework for Assessing the Load-Bearing Capacity of Existing PC Bridge Decks Accounting for Corrosion of Prestressing Strands

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

Damage Identification Analysis of Bridge Beam with Spaced Supports As Quasi-Periodic Structure

Multiple Tests for Dynamic Identification of a Reinforced Concrete Multi-Span Arch Bridge

Health monitoring of steel box girder bridges using non-contact sensors

Experimental Study of Bridge Expansion Joint Damage Based on Natural Frequency

ASSESSING THE STRUCTURAL ADEQUACY OF TIMBER BRIDGES USING DYNAMIC METHODS

HEALTH-MONITORING METHOD FOR BRIDGES UNDER ORDINARY TRAFFIC LOADINGS

Bridge health monitoring system based on vibration measurements

Energy-Based Damage Assessment Methodology for Structural Health Monitoring of Modern Reinforced Concrete Bridge Columns

Assessment of the structural condition of a cable-stayed footbridge based on dynamic tests

Structural behavior of damaged reinforced concrete beams under static cyclic loading