Abstract:The advancement of technology for accurate and dependable monitoring and evaluation of current bridge infrastructure conditions has become increasingly important in ensuring that bridge structures operate safely. Operational modal analysis (OMA) has been used to solve various engineering problems, including civil engineering structures, where OMA has been used to monitor systems on a global scale. Structural health monitoring (SHM) is a method of observing and assessing a process that involves sampling response measurements regularly to track changes in the material and geometric properties of structures. However, knowledge of massive structural health monitoring (SHM) data is poorly interpreted due to computational constraints and a lack of data analysis methodologies. By determining the structure's modal parameters, including the natural frequency and mode shape, this study applied ambient vibration testing to acquire vibration response measurements and thus determine the structure's dynamic characteristics. A comparison of three modal detection approaches (Frequency Domain Decomposition (FDD), Enhanced Frequency Domain Decomposition (EFDD), and Stochastic Subspace Identification (SSI)) was performed, and the mode shapes of each method were validated using the Modal Assurance Criterion (MAC) value to verify the accuracy of the results. On the basis of experimental data, a sensitivity-based updating method was used to justify and update the numerical finite element (FE) model of bridge structures. The difference between the updated FE and that measured for the first five dominant natural frequencies in this study was less than 5%. The updated model's minimum MAC value of 90% indicates that it was updated successfully. The updated dynamic parameter of the first dominant natural frequency (3.348 Hz) was used to figure out the structure's serviceability vibration limit state in accordance with EN 1991–2. The result was in the range that indicates that the bridge is safe for people to drive on.

ASSESSING THE STRUCTURAL ADEQUACY OF TIMBER BRIDGES USING DYNAMIC METHODS

Remotely Collaborative Pseudo-Dynamic Testing Of A Multi-Span Bridge

Performance Monitoring of Damaged Bridge Members Strengthened with Carbon Fiber Reinforced Polymer

Assessment of a Cantilever Bridge Deck Slab Using Multi-Level Assessment Strategy and Decision Support Framework

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

Improved bridge capacity rating methods based on system reliability assessment

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Bridge Rating Using System Reliability Assessment. I: Assessment and Verification by Load Testing

Bridge Load Testing for Identifying Live Load Distribution, Load Rating, Serviceability and Dynamic Response

Time‐varying frequency‐based scaled flexibility identification of a posttensioned concrete bridge through vehicle–bridge interaction analysis

Dynamic testing of a damaged bridge

Wireless vibration testing and bridge deck damage identification using underneath maintenance walkway

Structural Performance Evaluation of A Steel-Plate Girder Bridge Using Ambient Acceleration Measurements

Dynamic Assessment of Curved Cable-Stayed Bridge by Model Updating

Load Test Analysis of a Long-Span Prestressed Nano-Concrete Highway Bridge

Monitoring bearing damage in bridges using accelerations from a fleet of vehicles, without prior bridge or vehicle information

Structural condition assessment of a bridge pier: A case study using experimental modal analysis and finite element model updating

Bridge load testing and damage evaluation using model updating method

HEALTH-MONITORING METHOD FOR BRIDGES UNDER ORDINARY TRAFFIC LOADINGS

Health monitoring of steel box girder bridges using non-contact sensors

Operational modal analysis and finite element model updating of ultra-high-performance concrete bridge based on ambient vibration test