Abstract:Corrosion of reinforcement in concrete civil structures poses a significant challenge to their integrity and durability. To ensure the safety and longevity of such structures, effective monitoring strategies that can accurately detect, localise and assess the progression of damage are crucial. For most existing concrete structures, this is often challenging, as damage is already present when the monitoring campaign starts. In addition, reinforced concrete structures can be subject to a combination (or a succession) of corrosion and load-induced damage. By combining multiple measurement techniques, a more accurate and reliable condition assessment of concrete civil structures can be aimed for. This paper presents a comprehensive experimental study of the combination of vibration-based monitoring (VBM) and acoustic emission (AE) sensing techniques during progressive load tests of corroded reinforced concrete beams. Five beams were subjected to a cyclic four-point bending test, three of which were previously corroded while two beams remained undamaged prior to the mechanical loading. The influence of pre-existing corrosion damage and corresponding longitudinal concrete cracking on the modal characteristics (natural frequencies and strain mode shapes) and AE outcomes is investigated during the four-point bending test. The monitoring results obtained by both techniques are shown to be influenced by the pre-existing longitudinal concrete cracking caused by the reinforcement corrosion. Lower AE activity and a lower reduction in natural frequencies is observed for corroded RC beams during load bending tests when compared to uncorroded specimens. In addition, bending cracks occurring within the corroded zones appear to have a very limited effect on the identified strain mode shapes. These observations could possibly result in an underestimation of the damage and corresponding overestimation of the load-carrying capacity, as the corrosion damage conceals the occurrence of bending cracking on the AE and VBM outcomes.

Characterization of Corrosion-Induced Fracture in Reinforced Concrete Beams Using Electrical Potential, Ultrasound and Low-Frequency Vibration

Characterization of corrosion in reinforced concrete beams using destructive and non-destructive tests

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Developing a Three-Dimensional Finite Element Analysis Approach to Simulate Corrosion-Induced Concrete Cracking in Reinforced Concrete Beams

Corrosion Damages of Reinforced Concrete Characterized by X-ray CT and DVC Techniques

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Characterisation of corrosion-induced crack in concrete using ultrasonic diffuse coda wave

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Fractal Characterization of Non-Uniform Corrosion of Steel Bars in Concrete Beams after Accelerated Depassivation and Seven-Year Natural Corrosion.

Vibration monitoring and acoustic emission sensing during progressive load tests of corroded reinforced concrete beams

Performance of Reinforced Concrete Beams Corroded under Sustained Service Loads: A Comparative Study of Two Accelerated Corrosion Techniques

Experimental Study on the Relationship between the Natural Frequency and the Corrosion in Reinforced Concrete Beams

Use of Non-Linear Ultrasonic Techniques to Detect Cracks Due to Steel Corrosion in Reinforced Concrete Structures

Fractal Characteristics of Corrosion-Induced Cracks in Reinforced Concrete.

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Stochastic Characteristics of Reinforcement Corrosion in Concrete Beams under Sustained Loads

Combined Application of Novel Electromagnetic Sensors and Acoustic Emission Apparatus to Monitor Corrosion Process of Reinforced Bars in Concrete

An Electromechanical Impedance-Based Application of Realtime Monitoring for the Load-Induced Flexural Stress and Damage in Fiber-Reinforced Concrete