Abstract:Ultrasonic linear arrays have great potential to generate high-quality three-dimensional (3D) images by scanning the array. However, the generated images suffer from low resolution in the elevation plane, limiting the image quality for a reliable 3D Non-Destructive Testing (NDT) inspection. Although several ultrasonic imaging methods have been implemented to inspect different types of defects, there has been limited research to characterise surface-breaking cracks (SBCs) in 3D quantitatively. To improve the characterisation of surface-breaking cracks (SBCs), a 3D hybrid imaging method is proposed by combining the Half Skip Total Focusing Method (HSTFM) and the Synthetic Aperture Focusing Technique (SAFT) using a linear array. This paper proposed the implementation of an array with a reduced element length for full matrix capture (FMC) data acquisition. In conjunction with the hybrid imaging method, a reduced element array enables the utilisation of the information from a broad ultrasonic beam in the elevation direction to achieve improved image resolution. The imaging capability is assessed via a point spread function (PSF) as well as numerical simulations. From the PSF measurements, the image resolution is shown to improve with the smaller element length of the array, which is attributable to the combination of wide beamwidth and hybrid imaging method. Thereafter, experimental validation was performed with arrays of different elevation lengths, where an excellent match with the numerical results was observed. Furthermore, the crack sizing was performed using a 6-dB-drop rule, which assisted in accurately predicting the shape and size of the SBCs and is shown to measure the depth of SBCs with greater confidence. It is shown that a reduced array elevation with the hybrid imaging method and sizing method yields improved image resolution contrary to conventional linear arrays. This approach can offer a significant improvement in manifesting complete comprehension of the spatial defect relationship, enabling NDT engineers to analyse the inspection results quantitatively in 3D for progressive reliability.

Experimental study on the nonlinear mixing of ultrasonic waves in concrete using an array technique

A Study of Inner Crack Testing with the Laser Phased Array Method.

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Phased array-based nonlinear wave mixing technique: Application to lack-of-fusion porosity characterization in additively manufactured metals

Wave mixing technique for nondestructive assessment of alkali-silica reaction damage in concrete prism samples

Characterization of ultrasonic Rayleigh surface waves in asphaltic concrete

Concrete damage evolution analysis by backscattered ultrasonic waves

Simulations of ultrasonic wave propagation in concrete based on a two-dimensional numerical model validated analytically and experimentally

Nonlinear Ultrasonic Techniques for Testing Micro-Defects in Metal Matrix Composite Structure

Vibro-acoustic modulation and data fusion for localizing alkali–silica reaction–induced damage in concrete

Enhancement of Contact Acoustic Nonlinearity Effect in a Concrete Beam using Ambient Vibrations

Concrete damage diagnosed using the non-classical nonlinear acoustic method

Simulations and experimentation of ultrasonic wave propagation and flaw characterisation for underwater concrete structures

Ultrasonic computed tomography-based internal-defect detection and location of underwater concrete piers

Fast Lamb wave energy shift approach using fully contactless ultrasonic system to characterize concrete structures

Use of Non-Linear Ultrasonic Techniques to Detect Cracks Due to Steel Corrosion in Reinforced Concrete Structures

Two-step detection of concrete internal condition using array ultrasound and deep learning

Experimental and Numerical Investigation of the Micro-Crack Damage in Elastic Solids by Two-Way Collinear Mixing Method

Collinear Nonlinear Mixed-Frequency Ultrasound with FEM and Experimental Method for Structural Health Prognosis

Nonlinear ultrasonic imaging of damage in composite materials using a higher harmonic and modulated multi-path reciprocal method

3D ultrasonic imaging of surface-breaking cracks using a linear array