Abstract:Revealing pore evolution and metal vaporization mechanisms during additive manufacturing of Ni‐alloys using X‐ray and electron imaging, and high‐fidelity simulation, including: a) pore characteristics; b) grain texture; and c) high‐speed X‐ray images showed pore movement, coalescence and growth during AM. The high‐fidelity simulation model was used to quantify the solid‐liquid‐argon‐vapor interactions on: d) pore evolution; and e) metal vaporization mechanisms. Laser powder bed fusion (LPBF) can produce high‐value metallic components for many industries; however, its adoption for safety‐critical applications is hampered by the presence of imperfections. The interdependency between imperfections and processing parameters remains unclear. Here, the evolution of porosity and humps during LPBF using X‐ray and electron imaging, and a high‐fidelity multiphase process simulation, is quantified. The pore and keyhole formation mechanisms are driven by the mixing of high temperatures and high metal vapor concentrations in the keyhole is revealed. The irregular pores are formed via keyhole collapse, pore coalescence, and then pore entrapment by the solidification front. The mixing of the fast‐moving vapor plume and molten pool induces a Kelvin–Helmholtz instability at the melt track surface, forming humps. X‐ray imaging and a high‐fidelity model are used to quantify the pore evolution kinetics, pore size distribution, waviness, surface roughness, and melt volume under single layer conditions. This work provides insights on key criteria that govern the formation of imperfections in LPBF and suggest ways to improve process reliability.

Phased array-based nonlinear wave mixing technique: Application to lack-of-fusion porosity characterization in additively manufactured metals

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Experimental study on the nonlinear mixing of ultrasonic waves in concrete using an array technique

Scanning Non-Collinear Wave Mixing for Nonlinear Ultrasonic Detection and Localization of Plasticity

Nonlinear ultrasonic technique for the characterization of microstructure in additive materials

Metal additively manufactured phononic materials as ultrasonic filters in nonlinear ultrasound measurements

Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques

Nonlinear Ultrasonic Phased Array Imaging Based on Amplitude Modulation

Phased Array Ultrasonic Inspection of Metal Additive Manufacturing Parts

Evaluation of Plastic Deformation Considering the Phase-Mismatching Phenomenon of Nonlinear Lamb Wave Mixing

Application of Nonlinear Lamb Wave Mixing Method for Residual Stress Measurement in Metal Plate

Ultrasonic testing of thick and thin Inconel 625 alloys manufactured by laser powder bed fusion

Toward In-situ Characterization of Additively Manufactured Parts Using Nonlinear Resonance Ultrasonic Spectroscopy

Finite element simulation and experimental verification of ultrasonic non-destructive inspection of defects in additively manufactured materials

Nonlinear Lamb Wave Phased Array for Revealing Micro-Damage Based on the Second Harmonic Reconstruction

Simulation and experiment of ultrasonic phased array for additive manufacturing titanium alloy with columnar crystal structure

Experimental Investigation of Second-Harmonic Lamb Wave Generation in Additively Manufactured Aluminum

Evidence for contributions of lack-of-fusion defects and dislocations to acoustic nonlinearity and loss in additively manufactured aluminum

Quantification of Interdependent Dynamics during Laser Additive Manufacturing Using X‐Ray Imaging Informed Multi‐Physics and Multiphase Simulation

Spatial and directional characterization of wire and arc additive manufactured aluminum alloy using phased array ultrasonic backscattering method

Research Progress on Ultrasonic Nondestructive Testing Technology for Metallic Additive Manufacturing Components: A Review