Abstract:In this article, a holistic technique for sensing damage initiation, as well as damage progression in composite plates, is presented combining linear and nonlinear ultrasonic techniques. For this investigation, multiple sets of composite plate specimens made of two different composite materials were fabricated to check if the proposed technique works for different types of specimens. The specimens were damaged by impact loading and then inspected by propagating Lamb waves through them. Different failure mechanisms, such as fiber breaks, matrix cracking, debonding, and delamination, cause composite damage. Two groups of composite specimens that were fabricated and damaged were glass fiber–reinforced polymer composite and basalt fiber–reinforced polymer composite. A chirp signal excited by PZT (lead zirconate titanate) transducer was propagated through undamaged and damaged specimens to investigate the effects of varying degrees of damage on the recorded signals. Both linear and nonlinear ultrasonic parameters were extracted from the recorded signals and analyzed. The change in the linear ultrasonic parameters such as the wave speed and attenuation with damage progression were recorded. A new nonlinear ultrasonic parameter, the sideband peak count or sideband peak count-index, is also introduced and calculated from the recorded signals. It is observed that the nonlinear ultrasonic parameter can monitor the early stage of damage progression better than the linear ultrasonic parameters, while some linear ultrasonic parameters are more effective than the nonlinear ultrasonic parameter for monitoring the advanced stage of damage. Therefore, a combination of linear ultrasonic and nonlinear ultrasonic analyses is ideal for the holistic monitoring of the composite panels from the crack nucleation stage to the structural failure stage.

Nonlinear Ultrasonic Techniques for Testing Micro-Defects in Metal Matrix Composite Structure

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Research on nonlinear ultrasonic NDT of microcracks

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Detecting features of defect metal based on laser ultrasonic technique

Research Progress in Nonlinear Ultrasonic Testing for Early Damage in Metal Materials

Nonlinear ultrasonic test of micro-nano crack

Finite element based research on ultrasonic spectral characteristic of inner wall defect of metal materials

Research on nonlinear ultrasonic method for evaluating the mechanical properties of 3D printing aluminum alloy

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Linear and nonlinear ultrasonics for material damage evaluation and health monitoring

Numerical Simulation on Micro-damage Detection In CFRP Composites Based on Nonlinear Ultrasonic Guided Waves

Nonlinear Ultrasonic Crack Detection Based on 3D-Printed Phononic Crystal Filters

Nonlinear Ultrasonic Testing and Imaging for Tiny Flaw

Micro-Crack Detection Of Nonlinear Lamb Wave Propagation In Three-Dimensional Plates With Mixed-Frequency Excitation

Nonlinear Ultrasonic Testing of Fatigue Crack for Metal Component

Energy Transfer Efficiency Based Nonlinear Ultrasonic Testing Technique for Debonding Defects of Aluminum Alloy Foam Sandwich Panels

Monitoring damage in composite plates from crack initiation to macro-crack propagation combining linear and nonlinear ultrasonic techniques

Assessment of Material Dislocation Damage by Nonlinear Ultrasound

Non-contact detection of the interfacial microdefects in metal/CFRP hybrid composites using air-coupled laser ultrasound