Abstract:In order to detect the longitudinal cracks on the outside surface of a hollow components, a novel pattern of ultrasonic phased array transducers is designed. The shape of the transducer surface is rectangular and is distributed on the outside surface of a column, with the longer side parallel to the central axis of the column. Meanwhile the transducers are rotated with a certain angle about the longer side of the transducer surface. According to the structure of the transducers, this novel array is named as serrated columnar array. In this paper, a serrated columnar array is placed in the center of the hollow axle. Because of the rotated angle, the surface of each transducer is oblique relative to the surface of the inner surface of the hollow component, the transducers are expected to generate transverse waves in the inspection component. A delayed law calculation method, based on Snell' law, for focus beam forming through the curved interface is described. Two transient acoustic finite element models, one with crack and the other without crack, are established by using the COMSOL software to verify the performance of this array design, one with crack and the other one without crack. With the designed focus delayed laws, transverse waves can be generated and focused at the crack position. By applying the focus laws to the reception channels, and sum up the echo signals, the signal retrieved from the model with a longitudinal crack is stronger than that from the model without cracks. The results show that this special array pattern is potential to serve as an ultrasonic non-destructive tool to detect the longitudinal cracks on the outside surface of hollow components.

Nonlinear Ultrasonic Crack Detection Based on 3D-Printed Phononic Crystal Filters

Nonlinear Ultrasonic Detection Enhanced by 3-D Printed Phononic Crystals

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Reference-free Crack Detection and Localization by Nonlinear Laser Ultrasonic.

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Evolving Fatigue Damage Detection Based on Multi-Component Nonlinear Modulation Mechanism of Tuned Laser-Generated Rayleigh Waves

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

Applying Bandgap Defect Modes to Crack Detection in Beams Using Periodic Concentrated Masses

Research on nonlinear ultrasonic NDT of microcracks

Micro-Crack Detection Of Nonlinear Lamb Wave Propagation In Three-Dimensional Plates With Mixed-Frequency Excitation

Nonlinear ultrasonic detection of partially closed cracks in metal plates using static component of lamb waves

An ultrasensitive device with embedded phononic crystals for the detection and localisation of nonlinear guided waves

Nonlinear ultrasonic test of micro-nano crack

Nonlinear Nonclassical Acoustic Method For Detecting The Location Of Cracks

Nonlinear Ultrasonic Testing of Fatigue Crack for Metal Component

Damage Detection With Single Receiver by Multidirectional Dispersive Phononic Crystals

Ultrasonic Nonlinear Responses of a Closed Crack in Plate-like Structure

Detection of Longitudinal Cracks with a Serrated Columnar Phased Array Transducer: A Simulation Study

Nonlinear Ultrasonic Techniques for Testing Micro-Defects in Metal Matrix Composite Structure

Structural optimization of photoacoustic transducer with PDMS/CSNPs nanocomposite for fatigue crack detection using laser-induced nonlinear surface waves