Abstract:Ultrasonic Lamb wave testing allows health monitoring for plate structures and has been extensively applied in the modern industry. To obtain the location and further form the damage imaging, the time of flight (TOF) is a pivotal parameter. However, the dispersive and multimodal nature of the Lamb wave obstructs the accurate measurement of TOF. The objective of this article is to develop efficient techniques to separate multimodal Lamb wave signals and accomplish accurate damage localization. The narrowband Lamb wave is generated by the excitation signal with a center frequency of 150 kHz. The fundamental symmetric and antisymmetric modes are exploited. The adaptive polynomial chirplet transform (CT) is proposed to decompose the Lamb wave signals and identify the modes. Then, the instantaneous frequency characteristics are utilized to extract time information. Thus, the TOF is obtained and damage location can be calculated. The reconstruction error is defined to quantitate the difference between the reconstructed signal and the received signal. The obtained reconstruction errors from the simulation and experiment are 0.1631 and 0.2875, respectively. The varied defect location is adopted to obtain the TOF estimation. The results show that the proposed method outperforms the CT and cross correlation, especially for the longer propagation distances where the dispersion effect is distinct. For experiments considering the defect and boundary reflection, the localization errors of the collinear defect are 2.51% and 3.04% for the two Lamb wave modes. In comparison with smoothed-pseudo-Wigner–Ville distribution and CT, the proposed method owns superior performance on mode identification and location accuracy.

Damage Detection With Single Receiver by Multidirectional Dispersive Phononic Crystals

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Detection and localization of closely distributed damages via lamb wave sparse reconstruction

Evolving Fatigue Damage Detection Based on Multi-Component Nonlinear Modulation Mechanism of Tuned Laser-Generated Rayleigh Waves

Nonlinear Ultrasonic Crack Detection Based on 3D-Printed Phononic Crystal Filters

Damage localization with fiber Bragg grating Lamb wave sensing through adaptive phased array imaging

An ultrasensitive device with embedded phononic crystals for the detection and localisation of nonlinear guided waves

A Damage Localization Method With Multimodal Lamb Wave Based on Adaptive Polynomial Chirplet Transform

ULTRASONIC LAMB WAVES APPLIED IN NONDESTRACTIVE DAMAGE EVALUATION

Nonlinear Ultrasonic Detection Enhanced by 3-D Printed Phononic Crystals

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

A Robust Lamb Wave Imaging Approach to Plate-Like Structural Health Monitoring of Materials with Transducer Array Position Errors

Nondestructive Testing Method Based on Lamb Waves for Localization and Extent of Damage

Guided wave multi-frequency damage localization method in variable-thickness structures by one pair of sensors based on frequency-dependent velocity anisotropy

Damage detection in thick plate structures based on ultrasonic SH wave

Damage assessment using the Lamb wave factorization method

Amplitude modified sparse imaging for damage detection in quasi-isotropic composite laminates using non-contact laser induced Lamb waves

A Lamb Waves Based Ultrasonic System for the Simultaneous Data Communication, Defect Inspection, and Power Transmission

Noncontact Damage Topography Reconstruction by Wavenumber Domain Analysis Based on Air-Coupled Ultrasound and Full-Field Laser Vibrometer

A Lamb wave time-reversal field reconstruction method for damage detection with automatic focusing determination