Abstract:Reinforced concrete structures experience nonlinear vibration response because of softening in concrete due to damage, which results in unstable vibration. Thus, considering the nonlinearity in vibration for assessment of damage is imperative to identify the actual damage scenario. Nonlinearity is predominant during the initial stage of damage when cracks start developing in the concrete exhibiting nonlinear breathing-crack mechanism. By suitably extracting nonlinear features from ambient/forced vibration, information on initial stage of damage (primarily breathing-crack) in large concrete structures can be obtained. In the present study, evaluation of nonlinear dynamic features from an experimental model of a reinforced concrete bridge girder-deck system is investigated. The damage scenarios in the bridge girder is experimentally simulated by monotonically applied static load at different levels. Vibration responses are acquired using the accelerometers positioned at regular intervals, so that the global system behaviour can be assessed. Damage features at various damage levels are evaluated based on the signal statistics, amplitude dependency, harmonics, phase-plane information and so on. The breathing-crack behaviour of the bridge girder during initial damage stages is investigated and the existence of sub- and super-harmonic components in the frequency spectra is distinctly evidenced and their amplitudes are quantified. The change of skewness pattern of the frequency spectra with increasing damage level is also evaluated. A distinct variation in phase space portrait is observed with increase in damage levels. It is found that, in spite of presence of inherent material nonlinearity, nonlinearity caused through system damage, even at initial stages of damage, is predominant and could be distinctly captured without any baseline information. The identified nonlinear vibration characteristics showed a remarkable relevance in detecting breathing-crack type damage in weakly nonlinear bridge. The investigated damage features from this study would pave the way for real-time baseline free assessment and identification of damage in concrete structures.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to identify the initial crack damage (breathing crack type damage) in reinforced concrete bridges. Specifically, the paper explores the evaluation and identification of this type of damage by analyzing dynamic nonlinear characteristics. Traditional linear vibration techniques have limitations in damage identification, such as low sensitivity, the need for baseline information, dependence on excitation force, and environmental influence. Therefore, this paper studies the application of nonlinear vibration methods in detecting initial crack damage, especially how to extract nonlinear characteristics from environmental or forced vibration to obtain information about the damage. These nonlinear characteristics include signal statistics, amplitude dependence, harmonics, phase - plane information, etc. Through experimental simulation of damage scenarios under different levels of static load, and using accelerometers to obtain vibration responses, to evaluate the damage characteristics at different damage levels. The study found that even under the condition that the material itself is nonlinear, the nonlinearity caused by system damage is also significant in the initial damage stage and can be clearly captured by methods without baseline information. This indicates that the nonlinear vibration characteristics are significantly relevant for detecting breathing - crack - type damage in reinforced concrete structures.

Dynamic nonlinearities for identification of the breathing crack type damage in reinforced concrete bridges

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Methodologies for modeling and identification of breathing crack: A review

Use of Bispectrum Analysis to Inspect the Non-Linear Dynamic Characteristics of Beam-Type Structures Containing a Breathing Crack

Nonlinear assessment of “breathing” fatigue crack using steady-state vibration responses

Enhancement of Contact Acoustic Nonlinearity Effect in a Concrete Beam using Ambient Vibrations

Non-modal vibration-based methods for bridge damage identification

Nonlinear vibration analysis of beam-like bridges with multiple breathing cracks under moving vehicle load

Nonlinear characteristics of damaged bridges under moving loads using parameter optimization variational mode decomposition

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Multidamage Detection of Breathing Cracks in Plate‐Like Bridges: Experimental and Numerical Study

Experimental study of the nonlinear effects generated in a concrete structure with damaged integrity

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

Comparative study on sensitivity of acceleration and strain responses for bridge health monitoring

Investigation into vibration-based structural damage identification and amplitude-dependent damping ratio of reinforced concrete bridge deck slab under different loading states

Dynamic testing of a damaged bridge

An efficient technique for extraction of nonlinear dynamic features in a model-based feature extraction scheme for machine learning–based structural health monitoring

The dual Fourier transform spectra (DFTS): a new nonlinear damage indicator for identification of breathing cracks in beam-like structures

Dynamic Analysis of Beam with A Breathing Crack

Potential of Non-Contact Dynamic Response Measurements for Predicting Small Size or Hidden Damages in Highly Damped Structures

A Physics-Informed Neural Network for the Nonlinear Damage Identification in a Reinforced Concrete Bridge Pier Using Seismic Responses