Abstract:Reinforced concrete structures experience nonlinear vibration response because of softening in concrete due to damage, which results in unstable vibration. Thus, considering the nonlinearity in vibration for assessment of damage is imperative to identify the actual damage scenario. Nonlinearity is predominant during the initial stage of damage when cracks start developing in the concrete exhibiting nonlinear breathing-crack mechanism. By suitably extracting nonlinear features from ambient/forced vibration, information on initial stage of damage (primarily breathing-crack) in large concrete structures can be obtained. In the present study, evaluation of nonlinear dynamic features from an experimental model of a reinforced concrete bridge girder-deck system is investigated. The damage scenarios in the bridge girder is experimentally simulated by monotonically applied static load at different levels. Vibration responses are acquired using the accelerometers positioned at regular intervals, so that the global system behaviour can be assessed. Damage features at various damage levels are evaluated based on the signal statistics, amplitude dependency, harmonics, phase-plane information and so on. The breathing-crack behaviour of the bridge girder during initial damage stages is investigated and the existence of sub- and super-harmonic components in the frequency spectra is distinctly evidenced and their amplitudes are quantified. The change of skewness pattern of the frequency spectra with increasing damage level is also evaluated. A distinct variation in phase space portrait is observed with increase in damage levels. It is found that, in spite of presence of inherent material nonlinearity, nonlinearity caused through system damage, even at initial stages of damage, is predominant and could be distinctly captured without any baseline information. The identified nonlinear vibration characteristics showed a remarkable relevance in detecting breathing-crack type damage in weakly nonlinear bridge. The investigated damage features from this study would pave the way for real-time baseline free assessment and identification of damage in concrete structures.

Nonlinear assessment of “breathing” fatigue crack using steady-state vibration responses

Evolving Fatigue Damage Detection Based on Multi-Component Nonlinear Modulation Mechanism of Tuned Laser-Generated Rayleigh Waves

Study on nonlinear dynamic response of a beam with a breathing crack

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

Nonlinear vibration characteristics and damage detection method of blade with breathing fatigue crack

Use of Bispectrum Analysis to Inspect the Non-Linear Dynamic Characteristics of Beam-Type Structures Containing a Breathing Crack

Nonlinear Ultrasonic Testing of Fatigue Crack for Metal Component

The dual Fourier transform spectra (DFTS): a new nonlinear damage indicator for identification of breathing cracks in beam-like structures

Structural health monitoring using scanning laser vibrometry: III. Lamb waves for fatigue crack detection

Nonlinear ultrasonic detection of partially closed cracks in metal plates using static component of lamb waves

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

Ultrasonic guided waves-based fatigue crack detection in a steel I-beam: an experimental study

Nonlinear vibration analysis of beam-like bridges with multiple breathing cracks under moving vehicle load

Dynamic nonlinearities for identification of the breathing crack type damage in reinforced concrete bridges

Nonlinear acoustics for fatigue crack detection – experimental investigations of vibro-acoustic wave modulations

Vibration-Based Crack Identification of Generally Supported Beam Structures

Vibro-Acoustic Modulation Utilizing a Swept Probing Signal for Robust Crack Detection

Development and field application of a nonlinear ultrasonic modulation technique for fatigue crack detection without reference data from an intact condition

Application of scaled boundary finite element method for vibration-based structural health monitoring of breathing cracks

Numerical analysis of cracked beams using nonlinear output frequency response functions

Modelling nonlinearity of guided ultrasonic waves in fatigued materials using a nonlinear local interaction simulation approach and a spring model