Abstract:In modern gas turbines, efforts are being made to improve efficiency even further. This is achieved primarily by increasing the generated pressure ratio in the compressor and by increasing the turbine inlet temperature. This leads to enormous loads on the components in the hot gas region in the turbine. As a result, non-destructive testing and structural health monitoring (SHM) processes are becoming increasingly important to gas turbine manufacturers. Initial cracks in the turbine blades must be identified before catastrophic events occur. A proven method is the linear ultrasound method. By monitoring the amplitude and phase fluctuations of the input signal, structural integrity of the components can be detected. However, closed cracks or small cracks cannot be easily detected due to a low impedance mismatch with the surrounding materials. By contrast, nonlinear ultrasound methods have shown that damages can be identified at an early stage by monitoring new signal components such as sub- and higher harmonics of the fundamental frequency in the frequency spectrum. These are generated by distortion of the elastic waveform due to damage/nonlinearity of the material. In this paper, new global nonlinear parameters were derived that result from the dual excitation of two different ultrasound frequencies. These nonlinear features were used to assess the presence of cracks as well as their qualitative sizes. The proposed approach was tested on several samples and turbine blades with artificial and real defects. The results were compared to samples without failure. Numerical simulations were conducted to investigate nonlinear elastic interaction of the stress waves with the damage regions. The results show a clear trend of nonlinear parameters changing as a function of the crack size, demonstrating the capability of the proposed approach to detect in-service cracks.

Nonlinear vibration characteristics and damage detection method of blade with breathing fatigue crack

Research on the Influence of Crack Parameters on the Vibration Characteristics of Gas Turbine Compressor Blades

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

Study on Fatigue Degradation Behavior of a Cracked Rotor Subjected to Lateral Vibration

Dynamic characteristic analysis of rotating blade with breathing crack

Influence of alternating loads on nonlinear vibration characteristics of cracked blade in rotor system

Fatigue Damage Evaluation of Compressor Blade Based on Nonlinear Ultrasonic Nondestructive Testing

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

An improved analytical dynamic model for rotating blade crack: With application to crack detection indicator analysis

Nonlinear dynamic behavior of rotating blade with breathing crack

Evolving Fatigue Damage Detection Based on Multi-Component Nonlinear Modulation Mechanism of Tuned Laser-Generated Rayleigh Waves

Nonlinear assessment of “breathing” fatigue crack using steady-state vibration responses

Dynamic modeling and verification of rotating compressor blade with crack based on beam element

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

Axial-bending coupling vibration characteristics of a rotating blade with breathing crack

Dynamic Characteristic Analysis of Rotating Blade With Transverse Crack—Part I: Modeling, Modification, and Validation

Analysis of the Nonlinear Complex Response of Cracked Blades at Variable Rotational Speeds

A Nonlinear Ultrasonic Modulation Method for Crack Detection in Turbine Blades

A novel graph structure data-driven crack damage identification for compressor blade based on vibro-acoustic signal

Highly sensitive methods for vibration diagnostics of fatigue damage in structural elements of aircraft gas turbine engines

Crack modeling of rotating blades with cracked hexahedral finite element method