Dynamic modeling and verification of rotating compressor blade with crack based on beam element
Hong Guan,Kaixuan Ni,Hui Ma,Qian Xiong,Weiwei Wang,Hongji Wang
DOI: https://doi.org/10.1016/j.apm.2024.05.019
IF: 5.336
2024-05-25
Applied Mathematical Modelling
Abstract:Aero-engine blades may crack under harsh operating environments. This reduces the reliability of the aero-engine and causes catastrophic accidents. Although dynamic modeling and vibration characteristics of simplified blades with cracks have been analyzed extensively, there are few studies on the actual compressor blade with varying sections and twisted shapes. Based on Timoshenko beam theory, a new modeling approach for the compressor blade is proposed. Next, according to the strain energy release rate and Castingliano theory, the dynamic model of cracked compressor blades is established considering the stiffness nonlinearity induced by the breathing crack. The modeling approach is validated by the measured natural frequencies of an intact blade. Then, the dynamic model of the cracked blade is verified by comparing the modal characteristics and vibration characteristics using ANSYS software. Finally, some results show that the natural frequencies f n1 , f n2 , and f n4 increase as the pre-twisted angle and stagger angle increase. Due to the breathing effect, some integer frequencies appear in the spectrum including 0 f e and 2 f e , and the variations in the amplitude of frequencies 0 f r and 2 f r are monotonic under different aerodynamic amplitudes. The research can provide some help for the modeling of the actual blade and fault diagnosis of cracked blades.
mechanics,engineering, multidisciplinary,mathematics, interdisciplinary applications