Abstract:Abstract This study aims at the systematical improvement and comparative analysis of analytical crack models for the rotating blade. Part I of this study focuses on analytical modeling, model modification, and model validation of transverse crack for the rotating blade. The most widely applied analytical crack models for the rotating blade are reviewed and compared, and then their limitations are discussed. It is indicated that the conventional analytical crack models suffer from low physical interpretability and vibration prediction accuracy. By considering these limitations of conventional analytical crack models, model modification is performed to enhance the physical meaning and improve the accuracy. First, the stress-based breathing crack model is modified by direct calculation of the breathing function based on the theory of linear elastic fracture mechanics and resetting the correction factor of centrifugal stiffening stiffness. Second, the vibration-based breathing crack models, including bilinear breathing crack model and cosine breathing crack model, are modified by introducing the coupling effect between bending stress and centrifugal stress based on the stress state at the blade crack section. The additional bending moment induced by the blade part outside the crack section is considered in all analytical models. The modified crack models’ validity is verified by comparing vibration responses obtained by the modified crack models, the finite element contact crack model, and the conventional crack models. The comparative results suggest that the modified models promote the physical interpretability and improve the vibration prediction accuracy of analytical crack models.

Experimental and Numerical Investigation on the Influence of a Large Crack on the Modal Behaviour of a Kaplan Turbine Blade

Research on the Influence of Crack Parameters on the Vibration Characteristics of Gas Turbine Compressor Blades

Failure Investigation of a Kaplan Turbine Blade

Numerical Study on the Dynamic Behavior of a Francis Turbine Runner Model with a Crack

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Dynamic stress analysis of cracked rectangular blade: Simulation and experiment

Crack propagation and induced vibration characteristics of cracked cantilever plates under resonance state: Experiment and simulation

Effects of Crack on Vibration Characteristics of Mistuned Rotated Blades

Full-Scale Fatigue Testing of a Wind Turbine Blade in Flapwise Direction and Examining the Effect of Crack Propagation on the Blade Performance

Dynamic Characteristic Analysis of Rotating Blade With Transverse Crack—Part I: Modeling, Modification, and Validation

Dynamic characteristic analysis of rotating blade with breathing crack

Nonlinear dynamic behavior of rotating blade with breathing crack

Dynamic modeling and verification of rotating compressor blade with crack based on beam element

Study on rubbing characteristics of blade-casing model considering transverse cracks

Effects of multiple cracks on the forced response of centrifugal impellers

Analysis of the Nonlinear Complex Response of Cracked Blades at Variable Rotational Speeds

Dynamic Characteristic Analysis of Rotating Blade With Transverse Crack—Part II: A Comparison Study of Different Crack Models

Failure Investigation of a Kaplan Turbine Blade Lever

Nonlinear vibration characteristics and damage detection method of blade with breathing fatigue crack

Patterns of Transverse Crack Growth in a Steam Turbine Rotor Model Under Dynamic Loading