Abstract:Steel structures with thick‐walled section tend to have local fracture before the occurrence of instability under strong earthquakes, which is termed as ultra‐low cycle fatigue (ULCF). In this study, a series of specimens made with structural steel Q345qC for bridge in China were firstly tested to investigate the ULCF fracture behaviour in material level. Based on the test data, three models for ULCF fracture were calibrated. Subsequently, the fracture behaviour of thick‐walled square section steel bridge piers were also investigated in component level. Moreover, the finite element global and submodels of steel bridge piers were established, and ULCF fracture initiation life was predicted by calibrated models and validated against test results. The research results showed that the crack firstly occurred at the bottom of piers under cyclic oblique loading, which was at the junction between base plate and bottom weld, and then, cracks propagated along the bottom weld metal which did not cause a decrease in strength capacity. Finally, the strength capacity of steel bridge piers began to rapidly declined as cracks propagated into base metal. The presented finite element global model can accurately simulate the cyclic behaviour of steel bridge piers, and the submodel has the ability of capturing the local stress and plastic strain. The fracture models accurately predicted ULCF fracture initiation life of steel bridge piers with the average discrepancy of 7.14%. The developed finite element analysis method considering ULCF fracture provides a solution for the further parametric analysis on ULCF fracture performance of steel bridge piers.

Ultrasonic guided waves-based fatigue crack detection in a steel I-beam: an experimental study

Ultra-low Cycle Fatigue Fracture Initiation Life Evaluation of Thick-Walled Steel Bridge Piers with Microscopic Damage Index under Bidirectional Cyclic Loading

Study on Ultra‐low Cycle Fatigue Fracture of Thick‐walled Steel Bridge Piers

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

A Deformation History-Based Approach for Ultra-Low Cycle Fatigue Damage Evaluation of Steel Structures

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Applying Bandgap Defect Modes to Crack Detection in Beams Using Periodic Concentrated Masses

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

Crack Detection of Threaded Steel Rods Based on Ultrasonic Guided Waves

Guided Wave‐based Damage Assessment on Welded Steel I‐beam under Ambient Temperature Variations

Monitoring fatigue cracks in rib-to-deck joints of orthotropic steel deck using ultrasonic Lamb waves

Damage Identification in Thick Steel Beam Based on Guided Ultrasonic Waves

Fatigue Crack Detection in AISI 304 Austenitic Stainless Steel Using Nonlinear and Linear Ultrasonic Testing Methods

Online monitoring of fatigue damage in welded joints using diffuse ultrasound

Experimental investigation on monitoring the evolution of fatigue microcracks in marine high-strength steel by nonlinear ultrasonic technique

Guided wave-based crack detection in U-shaped flexural plate butt welds

Detection of fatigue-induced micro-cracks in a pipe by using time-reversed nonlinear guided waves: a three-dimensional model study.

Evaluation of fatigue damage of structural steel based on attenuation of laser-induced surface acoustic wave

Nonlinear assessment of “breathing” fatigue crack using steady-state vibration responses