Abstract:Ultrasonic guided waves represent a new development in the field of non-destructive testing. Longitudinal guided waves are mostly used to monitor the damage of steel bars, but the received signal is usually degraded and noisy owing to its dispersive propagation and multimodal behavior, making its implementation and location challenging. The torsional mode of T (0, 1) is not dispersive in the propagation of a steel bar and only produces circumferential displacement. It was chosen, in this study, to conduct guided wave-based damage monitoring on steel bars to reduce the signal processing complexity. The defects of steel bars, including circular surface defects, internal defects, and uniform damage defects, were thoroughly investigated, respectively, using numerical simulation. The waves were excited and received using the pitch-and-catch technique and the collected monitoring signals were processed using Hilbert transformation to highlight the amplitude and time-of-flight values of the wave signals, which were used for defect identification. In this paper, the reflectivity of guided waves is compared between torsional waves and longitudinal waves, in each case. The impact of defect size changes on damage monitoring is studied and the sensitivity of both the wave frequency and the wave mode (L and T) is also discussed. The results show that the monitoring method based on the torsional wave T (0, 1) is more sensitive to surface defects than the conventional method based on longitudinal waves. The reflectivity of the torsional wave T (0, 1) can be twice that of the longitudinal wave L (0, 1) when the depth of the defect in the circumferential grooves is less than 50% of the diameter of the steel bar. It is more sensitive to shallow surface defects within half of the bar's radius, and it can also effectively identify defects under the conditions of the uniform damage defects of steel bars, even when the measurements are heavily noise-polluted. This proves the superiority of the torsional guided wave T (0, 1) in defect monitoring and provides a theoretical basis for the application of the torsional guided wave T (0, 1) in actual monitoring.

Damage Identification in Thick Steel Beam Based on Guided Ultrasonic Waves

Damage Detection in Thick Steel Beam Based on Elastic Guided Wave

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Damage detection in thick steel beam using lamb waves

Ultrasonic Guided Wave Approach Incorporating SAFE for Detecting Wire Breakage in Bridge Cable

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Guided Waves Methods for Local Damage Assessments in Steel Structural Members

Ultrasonic guided waves-based fatigue crack detection in a steel I-beam: an experimental study

Damage detection in thick plate structures based on ultrasonic SH wave

Guided Wave‐based Damage Assessment on Welded Steel I‐beam under Ambient Temperature Variations

Nondestructive Testing Method Based on Lamb Waves for Localization and Extent of Damage

Characteristics of Elastic Wave Propagation in Thick Beams - when Guided Waves Prevail?

Damage Monitoring of Steel Bars Based on Torsional Guided Waves

A Coupled Approach for Damage Detection of Framed Structures Using Piezoelectric Signature

Guided wave multi-frequency damage localization method in variable-thickness structures by one pair of sensors based on frequency-dependent velocity anisotropy

ULTRASONIC LAMB WAVES APPLIED IN NONDESTRACTIVE DAMAGE EVALUATION

Application of Damage Detection of Metal Structure Lamb Wave Modal Superposition Imaging Based on Scanning Laser Vibration Measurement

Guided waves-based damage identification in plates through an inverse Bayesian process

Detection of damage in laminated composite structures using transverse shear mode

PZT-based active damage detection techniques for steel bridge components