Abstract:Self-assembly growth of quasi-1D nanowires (NWs) has been a popular, high yield and low cost technology to fabricate ideal semiconducting channels for fin-like field effect transistors or thin film transistors (TFTs). However, a technical challenge to implementing this approach for large scale electronic applications arises from the fundamental difficulty in collecting and positioning these tiny 1D building blocks into precise locations for convenient electric connection and integration. This is particularly true when the SiNWs were grown with gas-feeding vapor-liquid-solid (VLS) approach, where the as-produced SiNWs are typically standing ones on substrate, and thus require further delicate manipulations to arrange them on planar architecture. Fortunately, this challenge can be addressed by adopting a self-assembly in-plane solid-liquid-solid (IPSLS) growth of Si nanowires (SiNWs), where a thin film of amorphous Si (a-Si) is fed as precursor layer to drive the indium (In) or tin (Sn) nano-droplets to move and produce well-defined crystalline SiNWs behind.[1] Remarkably, a precise control of the location, the growth routine and the geometry of the SiNW channels can be accomplished via a simple low temperature (<350 oC) process in conventional plasma enhanced chemical vapor deposition (PECVD) system. We will first demonstrate a reliable batch-manufacturing of parallel SiNW arrays upon glass substrates, which can serve as high mobility channels in fin-like thin film transistors (Fin-TFTs) for large area display application. Specifically, the SiNWs Fin-FETs achieve a high hole mobility of >150 cm2V–1s–1, on/off ratio >106 and excellent subthreshold swing of 120 mV/dec. In addition, the tiny SiNWs, of ~60 nm in diameter and 2 μm apart grown on glass substrate, are transparent to visible light.[2] Furthermore, we will show that the geometry degree of freedom can also be programmed during the in-plane growth of SiNWs.[3,4,5] Finally, an alloy mixture or amorphous bilayer feeding control will be presented, which can help to achieve a self-automated phase-separation and diameter modulation in a unique Si/Ge superlattice nanowire structure. There results could indicate a promising strategy to tailor the Si or SiGe nanowires for high perfomance large area electronics. References [1] L. Yu, et al., Phys. Rev. Lett. 102, 125501 (2009). [2] M. Xu et al., Nanoscale 9, 10350 (2017). [3] Z. Xue et al., Adv. Func. Mater. 26, 5352 (2016). [4] Z. Xue et al., Nature commun. 7, 12836 (2016). [5] Z. Xue et al., Nano Lett. 17, 7638 (2017)

Ultra-high aspect ratio Si nanowires fabricated with plasma etching: plasma processing, mechanical stability analysis against adhesion and capillary forces and oleophobicity

OS1503 Development of Highly Ordered Silicon Nanowire Array

Super-wetting, wafer-sized silicon nanowire surfaces with hierarchical roughness and low defects

Silicon Nano-Wires Fabricated by Thermal Evaporation of Silicon Wafer

Wafer Scale Fabrication of Dense and High Aspect Ratio Sub-50 Nm Nanopillars from Phase Separation of Cross-Linkable Polysiloxane/Polystyrene Blend

Silicon Nano-Wires Fabricated by a Novel Thermal Evaporation of Zinc Sulfide

Array-orderly single crystalline silicon nano-wires

Deep-reactive ion etching of silicon nanowire arrays at cryogenic temperatures

Tiny silicon nano-wires synthesis on silicon wafers

In-Plane Solid-Liquid-Solid Growth and Engineering of Si and Si/Ge Nanowires for Integratable High Performance Fin-like Thin Film Transistors

Silicon nanowires fabricated by thermal evaporation of silicon monoxide

Terrace-confined guided growth of high-density ultrathin silicon nanowire array for large area electronics

Dispersion, Refinement, and Manipulation of Single Silicon Nanowires

Silicon nanowire aqueous dispersions for processing into macroscopic network materials

Fabrication of Needle-Like Silicon Nanowires by Using a Nanoparticles-Assisted Bosch Process for Both High Hydrophobicity and Anti-Reflection

Fabrication and characterization of polycrystalline silicon nanowires with silver-assistance by electroless deposition

Fabrication and Properties of Large-Area Silicon Nanowire Arrays

Fabrication of Single‐Crystalline Silicon Nanowires by Scratching a Silicon Surface with Catalytic Metal Particles

Precise morphology control of in-plane silicon nanowires via a simple plasma pre-treatment

Design and fabrication of wafer-scale highly uniform silicon nanowire arrays by metal-assisted chemical etching for antireflection films

Nanoscale Silicon Wires Synthesized Using Simple Physical Evaporation