Abstract:The sol–gel method was used to synthesize Zn 2+ doped LiNi 0.8−x Zn x Co 0.1 Mn 0.1 O 2 (0 ≤ x ≤ 0.05) cathode materials with crystallite sizes ranging from 20.36 to 56.25 nm. The thermal stability of all cathodes were characterized by using thermogravimetric analysis (TGA) and quantity of heat needed is calculated by differential thermal analysis (DTA). Their structural, morphological and functional group analysis by XRD, FE-SEM, and FT-IR spectroscopy respectively. The electrochemical properties of two selected cathodes were also investigated via constant voltage, galvanostatic charge/discharge testing, and electrochemical impedance spectroscopy. The TGA/DTA analysis identified the reaction, weight loss, and phase transformation regions of the precursors. The XRD analysis revealed that all the synthesized cathodes possessed a rhombohedra-hexagonal system with a layered crystalline phase ( R3̄m space group). The formation of layered-type structures in all cathodes was also revealed by FT-IR analysis. The content of Zn 2+ ions in LiNi 0.8−x Zn x Co 0.1 Mn 0.1 O 2 had a significant impact on the structural parameters, such as lattice constants, cell volume, and crystallite size of LiNi 0.8 Co 0.1 Mn 0.1 O 2 . The level of cation mixing and layered structure of all samples were found to be 1.22–1.38 and 4.9827–5.0195, respectively, indicating that all samples possessed minimal cation mixing and a well-defined layered structure. Such behaviors are important for obtaining improved cyclic performance from these kinds of cathode materials. Agglomerated and porous structure morphology with a grain size from 200 to 320 nm was observed via FE-SEM. The initial discharge capabilities for the LiNi 0.8 Co 0.1 Mn 0.1 O 2 and LiNi 0.77 Zn 0.03 Co 0.1 Mn 0.1 O 2 cathodes were found to be 214.84 and 233.57 mAh g −1 , respectively, at a 0.1 C current rate between 3.0 and 4.6 V. This revealed that the discharge capacity of the pristine LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode was significantly increased by doping Zn 2+ with an x = 0.03 content, which is higher than the previously reported LiNi 0.33 Co 0.33 Mn 0.33 O 2 cathode.

Enhanced Electrochemical Properties of Zr4+-doped Li1.20[Mn0.52Ni0.20Co0.08]O2 Cathode Material for Lithium-ion Battery at Elevated Temperature

Preparation and Electrochemical Properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 Cathode Materials for Li-ion Batteries

Enhanced electrochemical properties and thermal stability of Zr4+ doped Li1.20Mn0.54Ni0.13Co0.13O2 cathode material by a Li ion conductor of Li3PO4 surface coating

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Comparative Studies of Zirconium Doping and Coating on LiNi0.6Co0.2Mn0.2O2 Cathode Material at Elevated Temperatures

Improving the Electrochemical Properties of High-Energy Cathode Material Lini0.5co0.2mn0.3o2 by Zr Doping and Sintering in Oxygen

Li2ZrO3 Coated LiFe0.4Mn0.6PO4/C with Enhanced Cycling Performance at Elevated Temperature for Lithium-Ion Batteries

Synthesis of LiNi0.9Co0.05Mn0.05O2 and modification with co-doping of Zr4+ and W6+ using acid leaching solution from spent lithium-ion batteries

Synthesis and Characterization of M-doped Li1.05Co0.3Ni0.35Mn0.3O2 (M=Zn, Fe, Ti, Zr) Cathode Materials for Lithium ion Battery

Synthesis and electrochemical performance of LiNi_(1/3)Mn_(1/3)Co_(1/3)O_2-zFz cathode materials for lithium ion batteries

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Co-precipitation synthesis and performance of multi-doped LiCr x Ni x Mn 2-2x O 4-z F z cathode materials for lithium ion batteries

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

A Three in One Strategy to Achieve Zirconium Doping, Boron Doping, and Interfacial Coating for Stable LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode

A Three in One Strategy to Achieve Zirconium Doping, Boron Doping, and Interfacial Coating for Stable LiNi0.8Co0.1Mn0.1O2 Cathode

Collaboratively enhancing electrochemical properties of LiNi0.83Co0.11Mn0.06O2 through doping and coating of quadrivalent elements

Enhancing Electrochemical Performance of LiMn2O4 Cathode Material at Elevated Temperature by Uniform Nanosized TiO2 Coating

Al2O3-Coated, Single Crystal Zr/Y co-Doped High-Ni NCM Cathode Materials for High-Performance Lithium-Ion Batteries

Enhanced low voltage cycling stability of LiMn2O4 cathode by ZnO coating for lithium ion batteries

Dual functions of zirconium metaphosphate modified high-nickel layered oxide cathode material with enhanced electrochemical performance

Effect of Zn2+ doping on thermal, structural, morphological, functional group, and electrochemical properties of layered LiNi0.8Co0.1Mn0.1O2 cathode material