Abstract:Olivine-type LiMPO4 (M = Fe, Mn, Co, Ni) has become of great interest as cathodes for next-generation high-power lithium-ion batteries. LiMnPO4, possessing a moderate working voltage compatible to the present electrolyte systems, can provide a higher energy density than LiFePO4 on account of its higher redox potential of Mn3+/Mn2+ (4.1 V) than Fe3+/Fe2+ (3.5 V). However, the electrochemical performance of LiMnPO4 is poor due to the slow lithium diffusion kinetics within the grains and the low intrinsic electronic conductivity, even much worse than those of LiFePO4. Up to now, low electronic conductivity can be successfully overcome by modifying the LiMnPO4 particles with carbon and minimizing particle size. The mesoporous and hollow sphere structure can further improve the electrochemical performance of olivine-type LiMnPO4 material. Here, we synthesized the mesoporous hollow sphere LiMn0.8Fe0.2PO4/C composite by a solvothermal method using spherical Li3PO4 as the precursor. The small crystalline size of (~50 nm) LiMn0.8Fe0.2PO4 can reduce the diffusion length for lithium ion transport leading to the enhanced rate capability. The mesoporous and hollow sphere structure offers high surface area, which can enhance the electrochemical performance of LiMn0.8Fe0.2PO4/C composite as show in Figure 1. The material exhibits an ultra-long cycle life exceeding 1000 cycles with an extremely low capacity decay of 0.0068 mAh·g-1 loss per cycle, which is the best cycling performance to our knowledge. The results exhibit that the mesoporous hollow sphere LiMn0.8Fe0.2PO4/C composite is a promising cathode material for lithium ion batteries. Figure 1

Li2ZrO3 Coated LiFe0.4Mn0.6PO4/C with Enhanced Cycling Performance at Elevated Temperature for Lithium-Ion Batteries

Heightening the long cycling stability and reducing oxygen loss of Li-rich cathode materials by Mo–F Co-doping for half/full lithium-ion batteries

Enhanced Electrochemical Properties of Nano-Li3po4 Coated on the LiMn2O4 Cathode Material for Lithium Ion Battery at 55 °C

Electrochemically Induced Interface by LiBOB to Enhance Cycling Performance of LiFe0.4Mn0.6PO4 Cathode for Lithium-Ion Batteries

Enhanced Electrochemical Properties of Zr4+-doped Li1.20[Mn0.52Ni0.20Co0.08]O2 Cathode Material for Lithium-ion Battery at Elevated Temperature

Surface Modification Engineering Enabling LiMn x Fe1‐ x PO4 Cathode Against Aggressive Cathode Chemistries for Excellent Performance Lithium‐ion batteries

Mn-Rich Induced Alteration on Band Gap and Cycling Stability Properties of LiMnxFe1-xPO4 Cathode Materials.

Improving electrochemical performance of LiMn<sub>0.5</sub>Fe<sub>0.5</sub>PO<sub>4</sub> cathode by hybrid coating of Li<sub>3</sub>VO<sub>4</sub> and carbon

Enhanced low voltage cycling stability of LiMn2O4 cathode by ZnO coating for lithium ion batteries

AlPO4-Li3PO4 Dual Shell for Enhancing Interfacial Stability of Co-free Li-rich Mn-based Cathode

Enhancement of Li2ZrO3 Modification of the Cycle Life of N/S-Doped LiMn0.5Fe0.5PO4/C Composite Cathodes for Lithium Ion Batteries.

Enhanced cycling performance of Li ion batteries based on Ni-rich cathode materials with LaPO4/Li3PO4 co-modification

One-pot synthesis and multifunctional surface modification of lithium-rich manganese-based cathode for enhanced structural stability and low-temperature performance

LiFePO4-coated LiNi0.6Co0.2Mn0.2O2 for Lithium-Ion Batteries with Enhanced Cycling Performance at Elevated Temperatures and High Voltages

Mn-doped LiFePO 4 @C as a high-performance cathode material for lithium-ion batteries

High Performance Iron-Doped LiMnPO4 Cathode Material for Lithium-Ion Batteries

Improved Electrochemical Performances of Li- and Mn-Rich Layered Oxides 0.4li4/3mn2/3o2·0.6lini1/3co1/3mn1/3o2 Cathode Material by Co3O4 Coating

The Elevated Temperature Performance of LiMn2O4 Coated with Li4Ti5O12 for Lithium Ion Battery

High Performance Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.75x(BO3)0.25xO2-3.75x Cathode with Polyanion for Li-Ion Batteries

Fabrication of FePO 4 layer coated LiNi 1 / 3 Co 1 / 3 Mn 1 / 3 O 2 : Towards high-performance cathode materials for lithium ion batteries

Enhanced Low-Temperature Performance of Slight Mn-substituted LiFePO 4 /C Cathode for Lithium Ion Batteries