Abstract:Irreversible phase transition and surface residual lithium, which cause the fast capacity fading of LiNi0.8Co0.1Mn0.1O2 (NCM811), are the main obstacles that hinder their commercial application. Herein, to modify the surface/interphase properties of NCM811, we elaborately propose a hybrid Li3PO4-AlPO4-Al(PO3)(3) coating layer that combines the advantages of ionic conductor (Li3PO4) and thermal stable compound (AlPO4) via reacting aluminum metaphosphate (Al (PO3)(3)) precursor with the surface residual lithium (Li2CO3 or/and LiOH) during the coating process. When used as cathode for lithium-ion battery, the optimized NCM811 delivers a high initial discharge capacity of 201.8 mAh g(-1) and 218.9 mAh g(-1) at 0.1C under the temperature of 30 degrees C and 50 degrees C, with capacity retention of 85.4% and 78.89% after 50 cycles, respectively, which are much higher than that of uncoated sample (73.93% and 57.98%). Moreover, when it is coupled with graphite anode to form a lithium-ion full cell, it delivers an impressively high energy density of 467.5 Wh kg(-1) (based on mass of positive and negative material), and retains 71.8% of its initial energy density after 100 cycles. The significantly enhanced electrochemical properties should be attributed to the multifunctional hybrid nano-coating layer that could efficiently reduce the surface residual lithium, suppress the irreversible phase transition, and prevent the active materials from the erosion of HF as verified by the ex-situ X-ray diffractometry, Raman spectroscopy and transmission electron microscopy. This work provides new insights into the surface/interphase design strategies to improve the structural stability of Ni-rich cathode, which will promote the development of high capacity cathode materials.

Fabrication of FePO 4 layer coated LiNi 1 / 3 Co 1 / 3 Mn 1 / 3 O 2 : Towards high-performance cathode materials for lithium ion batteries

Enhanced Electrochemical Property of FePO4-coated LiNi0.5Mn1.5O4 As Cathode Materials for Li-ion Battery

Effect of Amorphous FePO4 Coating on Structure and Electrochemical Performance of Li1.2Ni0.13Co0.13Mn0.54O2 As Cathode Material for Li-ion Batteries

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

Surface modification of Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 oxide with Fe2O3 as cathode material for Li-ion batteries

Enhanced Electrochemical Performance And Thermal Stability Of A Cepo4-Coated Li1.2ni0.13co0.13mn0.54o2 Cathode Material For Lithium-Ion Batteries

SmPO4-coated Li1.2Mn0.54Ni0.13Co0.13O2 As a Cathode Material with Enhanced Cycling Stability for Lithium Ion Batteries

Improved Electrochemical Performance and Thermal Stability of Li-Excess Li1.18co0.15ni0.15mn0.52o2 Cathode Material by Li3po4 Surface Coating

Improving electrochemical performance of LiMn<sub>0.5</sub>Fe<sub>0.5</sub>PO<sub>4</sub> cathode by hybrid coating of Li<sub>3</sub>VO<sub>4</sub> and carbon

Preparation and Electrochemical Properties of Carbon-Coated LiMn0.6Fe0.4PO4 Cathode Material for Lithium-Ion Batteries

Improved Electrochemical Performances of Li- and Mn-Rich Layered Oxides 0.4li4/3mn2/3o2·0.6lini1/3co1/3mn1/3o2 Cathode Material by Co3O4 Coating

Enhanced Electrochemical Properties of Nano-Li3po4 Coated on the LiMn2O4 Cathode Material for Lithium Ion Battery at 55 °C

The Effect of FePO4 Coating on Electrochemical Performance for Nano-LiMn2O4 Cathode Material

Enhanced cycling performance of Li ion batteries based on Ni-rich cathode materials with LaPO4/Li3PO4 co-modification

Studies of the electrochemical properties and thermal stability of LiNi 1/3 Co 1/3 Mn 1/3 O 2 /LiFePO 4 composite cathodes for lithium ion batteries

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

Enhancing the electrochemical performances of LiNi 0.5 Mn 1.5 O 4 by Co 3 O 4 surface coating

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Based on first-principles calculation, study on the synthesis, and performance of Fe–Ni co-doped LiMnPO4/C as cathode material for lithium-ion batteries

Investigation of Li 3 PO 4 Coating and Nb 5+ Doping Effect on the Crystal Structure and Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode