Abstract:Lithium‐rich layered oxides (LRLO) have attracted great interest for high‐energy Li‐ion batteries due to their high theoretical capacity. However, capacity decay and voltage fade during the cycling impede the practical application of LRLO. Herein, the use of lithium bis‐(oxalate)borate (LiBOB) as an electrolyte additive is reported to improve the cycling stability in high voltage LRLO/graphite full cells. The cell with LiBOB‐containing electrolyte delivers 248 mAh g−1 initial capacity and shows no capacity decay after 70 cycles as well as 95.5% retention after 150 cycles over 4.5 V cycling. A systematic mechanism study for the LiBOB‐enabled cycling performance improvement is conducted. Analytical electron microscopy under cryo‐condition confirms the formation of a uniform interphase and less phase transformation on the LRLO particle, accompanied by less voltage decay in the cathode. The formation of B‐F species is identified in the cycled electrolyte, elucidating the HF scavenger effect of LiBOB. Due to less HF corrosion on both electrode interphases, a reduced amount of transition metal dissolution and redeposition on the graphite is proved, thereby mitigating the capacity decay in LRLO/graphite full cells. These findings suggest that the borate additive is a promising strategy to optimize high voltage electrolyte for the industrialization of LRLO. This work reports the use of lithium bis‐(oxalate)borate (LiBOB) as an electrolyte additive to improve the cycling stability in high‐voltage LRLO/graphite full cells. The cell with the LiBOB‐containing electrolyte delivers 248 mAh g−1 initial capacity and shows no capacity decay after 70 cycles and 95.5% retention after 150 cycles. The HF scavenger effect of LiBOB in high‐voltage electrolytes is also studied with multiple advanced characterization tools in this work.

Electrochemically Induced Interface by LiBOB to Enhance Cycling Performance of LiFe0.4Mn0.6PO4 Cathode for Lithium-Ion Batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Catalytic Strategies Enabled Rapid Formation of Homogeneous and Mechanically Robust Inorganic‐Rich Cathode Electrolyte Interface for High‐Rate and High‐Stability Lithium‐Ion Batteries

Li2ZrO3 Coated LiFe0.4Mn0.6PO4/C with Enhanced Cycling Performance at Elevated Temperature for Lithium-Ion Batteries

Impact of Lithium Bis(oxalate)borate Electrolyte Additive on the Performance of High-Voltage Spinel/Graphite Li-Ion Batteries

Lithium difluoro(oxalate)borate as an efficient and multifunctional additive for extended cycling life of LiFePO4 cathodes

Simultaneous Stabilization of LiNi0.76Mn0.14Co0.10O2 Cathode and Lithium Metal Anode by LiBOB Additive.

Understanding Boron Chemistry as the Surface Modification and Electrolyte Additive for Co‐Free Lithium‐Rich Layered Oxide

Enhancing cycling stability in Li-rich Mn-based cathode materials by solid-liquid-gas integrated interface engineering

Improving electrochemical performance of LiMn<sub>0.5</sub>Fe<sub>0.5</sub>PO<sub>4</sub> cathode by hybrid coating of Li<sub>3</sub>VO<sub>4</sub> and carbon

Enhancement of high voltage cycling performance and thermal stability of LiNi 1/3 Co 1/3 Mn 1/3 O 2 cathode by use of boron-based additives

High Performance Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.75x(BO3)0.25xO2-3.75x Cathode with Polyanion for Li-Ion Batteries

Interface Modifications by Anion Receptors for High Energy Lithium Ion Batteries

Simultaneous Stabilization Of Lini0.76mn0.14co0.10o2 Cathode And Lithium Metal Anode By Lithium Bis(Oxalato)Borate As Additive

Elucidating the Effect of Borate Additive in High‐Voltage Electrolyte for Li‐Rich Layered Oxide Materials

An Interfacial Mechanism of Chelate-Borate Electrolyte Additives in Ni-Rich LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

Surface Modification Engineering Enabling LiMn x Fe1‐ x PO4 Cathode Against Aggressive Cathode Chemistries for Excellent Performance Lithium‐ion batteries

Enhanced prelithiation performance of Li 5 FeO 4 cathode additive and optimized solid electrolyte interface enabled by Mn substitution

CePO4/Spinel dual encapsulating on Li-rich Mn-based cathode with novel cycling stability

Simultaneous dual modification of Li-rich Mn-based cathode in restraining oxygen release and structure distortion

Enhanced cycling performance of Li ion batteries based on Ni-rich cathode materials with LaPO4/Li3PO4 co-modification