Abstract:H2S has become a significant environmental problem because of its high toxicity, corrosiveness, and low olfactory threshold. Therefore, the high-performance removal of H2S has become a research focus. Low-temperature (<180 degrees C) H2S selective catalytic oxidation (H2S-SCO) technology has the advantages of high desulfurization accuracy and no secondary pollution. This technology is especially suitable for effectively removing H2S, and the catalysts play a critical role. Metal oxide (MO)-based catalysts (single metal oxides catalysts, mixed metal oxides catalysts, oxide-supported catalysts), and carbon-based catalysts (activated carbon, carbon nanofibers, carbon nanotubes, graphene-based materials, and alkaline mesoporous carbon) used for H2S removal are comprehensively discussed. This review summarizes the research progress of various catalysts for H2S-SCO, and compares their advantages and disadvantages. The influencing factors including internal factors such as basic surface/groups, structural defects, sulfur storage space, and external factors such as humidity, temperature, O-2, GHSV of catalysts performance, and possible catalytic oxidation mechanisms of catalysts are systematically expounded. Out of all the catalysts reviewed, oxide-supported catalysts have shown desirable effects in H2S removal. The regeneration methods for different catalysts are also reviewed and it was found that the high porosity of catalysts with large specific surface areas is crucial for maintaining good regeneration capacity. Compared with thermal regeneration, CS2, and ammonium hydroxide solution washing regeneration are more cost-effective and worthy of further research as regeneration methods. Finally, it is recommended that additional investigation is required to understand the mechanism of interaction between H2S, and catalysts and to identify the effects of H2S, organic sulfur, ammonium hydroxide, and CO2 on catalyst activity.

Surface characteristics of regenerative Fe-KOH/LSB catalysts for low-temperature catalytic hydrolysis of carbon disulfide and research of the surface regeneration mechanism

Influence of surface characteristics on carbon disulfide catalytic hydrolysis over modified lake sediment biochar and research on deactivated mechanism

Adsorptive Oxidation of Aqueous Sulfide Onto Zerovalent Cobalt and Magnetite-Supported Biochars: Insights into Synthesis and Mechanistic Performance

Surface characterization of metal oxides-supported activated carbon fiber catalysts for simultaneous catalytic hydrolysis of carbonyl sulfide and carbon disulfide

Regeneration of the exhausted mesoporous Cu/SBA-15-[N] for simultaneous adsorption–oxidation of hydrogen sulfide and phosphine

Catalyst Deactivation and Regeneration Processes in Biogas Tri-Reforming Process. The Effect of Hydrogen Sulfide Addition

Heterogeneous catalytic oxidation regeneration of desulfurization-rich liquor with Fe3+ modified chitosan

Influence of Surface Basic sites and Oxygen Vacancies on the Performance of Metal‐Modified Rod‐Like Ceria Catalysts for Low‐Temperature Hydrolysis of Carbonyl Sulfide

Regeneration of Selective Catalyst Reduction Catalysts Deactivated by Pb, As, and Alkali Metals

Activated-carbon-induced morphological and crystal transformation of α-FeOOH for efficient catalytic removal of hydrogen sulfide from blast furnace gas

A High-Efficient Carbon-Coated Iron-Based Fenton-Like Catalyst with Enhanced Cycle Stability and Regenerative Performance

Deactivation and Regeneration for the SO2-Poisoning of a Cu-SSZ-13 Catalyst in the NH3-SCR Reaction

Sulfur-resistance iron catalyst in sulfur-containing VOCs abatement modulated through H2 reduction

Silica improved formation of Fe(III)-S and electron-deficient effect in Fe-based catalysts to improve hydrodesulfurization

Regeneration mechanism of a deactivated zeolite-supported catalyst for the combustion of chlorinated volatile organic compounds

Low temperature selective catalytic oxidation of H<sub>2</sub>S: Influencing factors, mechanisms and regeneration

Low-temperature hydrolysis of carbonyl sulfide in blast furnace gas using Al2O3-based catalysts with high oxidation resistance

Dry Reforming of Model Biogas on a Ni/SiO2 Catalyst: Overall Performance and Mechanisms of Sulfur Poisoning and Regeneration

Low Temperature Catalytic Hydrolysis of Carbon Disulfide on Activated Carbon Fibers Modified by Non-thermal Plasma

Nature Identification of Cu Active Sites in Sulfur-Fouled Cu/SAPO-34 Regeneration

Influence of CoAl2O4 spinel and Co-phyllosilicate structures derived from Co/sepiolite catalysts on steam reforming of bio-oil for hydrogen production