Abstract:Utilization of inherent active minerals in coal is an effective strategy for high-performance activated carbon (AC) production, such as calcite and pyrite. In this research, ACs were prepared through blending demineralized Ningxia coal with calcite (CaCO3, 0-8 wt.%) and pyrite (FeS2, 0-3 wt.%). The combined effect of inherent pyrite and calcite in coal on the as-prepared AC's texture and SO2 and/or NO removal performance was discussed. The results indicated that: (1) The combined effect of calcite and pyrite showed nonlinearly on weight loss and burn -off, and reduced AC's yield. The impact of calcite on pore structure was more evident than pyrite. Meanwhile, calcite and pyrite enhance the content of C-O (C 1 s) and pi-pi*, and new mineral CaS could be formed through interaction between calcite and pyrite; (2) Calcite and pyrite promote AC's SO2 and NO removal ability evidently. Pyrite and calcite regulate physiochemical texture, and the physical and chemical adsorption of SO2/ O2/H2O was enhanced. Meanwhile, iron and calcium ingredients in AC catalyzed desulfurization. CaO could participate in the SO2 removal process. Fe2O3 oxidized SO2 to SO3 and then forms H2SO4 rapidly, meanwhile, a redox cycle of Fe3+ and Fe2+ was established. Enhancement of NO removal was more evident than SO2, which was mainly due to Fe2O3 being helpful to oxidizing NO to NO2, and calcium components could enhance the adsorption of NH3 and NO and finally promote "fast SCR"; (3) During simultaneous desulphurization and denitrification, sulfur capacity was obviously enhanced and NO conversion was declined. The mechanism was proposed as follows: the existence of NH3 could enhance the SO2 adsorption through chemisorption and/or catalytic oxidization; Due to the competitive adsorption of SO2, denitrification declined. This research could guide high-performance AC production by utilizing high-inorganic-calcium/iron/sulfur coal.

Activated-carbon-induced morphological and crystal transformation of α-FeOOH for efficient catalytic removal of hydrogen sulfide from blast furnace gas

Efficient removal of carbonyl sulfur and hydrogen sulfide from blast furnace gas by one-step catalytic process with modified activated carbon

Constructing oxygen vacancy-enriched Fe3O4@MnO2 core–shell nanoplates for highly efficient catalytic oxidation of H2S in blast furnace gas

Highly Dispersed FeAg-MCM41 Catalyst for Medium-Temperature Hydrogen Sulfide Oxidation in Coke Oven Gas.

Sulfur-resistance iron catalyst in sulfur-containing VOCs abatement modulated through H2 reduction

Desulfurization performance of iron supported on activated carbon

Effect of multi-component gas on removal of trace hydrogen sulfide activity from blast furnace gas using activated carbon adsorbent

Mesoporous SBA-15 Supported Iron Oxide: A Potent Catalyst for Hydrogen Sulfide Removal

Fe Oxides Loaded on Carbon Cloth by Hydrothermal Process As an Effective and Reusable Heterogenous Fenton Catalyst

Resource Utilization of Exhausted Activated Coke As the Efficient Material for Simultaneous Removal of Cos and H &Lt;sub>2</sub>s

Modulating the Activity and SO2 Resistance of Α-Fe2o3 Catalysts for NH3-SCR of NOx Via Crystal Facet Engineering

Preparation of activated carbon supported Fe-Al2O3 catalyst and its application for hydrogen production by catalytic methane decomposition

Highly active and stable Cu Fe /AC-H catalysts with CuFe2O4 for NO reduction by CO in the presence of H2O and SO2 under regeneration gas

Study on Simultaneous Removal of SO2 and NOx from Sintering Flue Gas over Fe-Mn/AC Catalyst

Ammonia-induced CuO/13X for H2S removal from simulated blast furnace gas at low temperature

Modulating the Electronic Structures of Fe3C-based Catalyst by Surface Sulfidation to Facilitate H2O2 Activation

Construction of Fe-based amorphous active surface microenvironment and its synergistic Fenton-like treatment of organic pollutants

Efficient calcium sulfite oxidation treatment by a highly active iron-manganese bimetallic metal-organic frameworks (MOFs)

Modulating the Activity and SO 2 Resistance of α-Fe 2 O 3 Catalysts for NH 3 -SCR of NO x via Crystal Facet Engineering

Effect of trace oxygen on smelter off‐gas reduction desulphurization process over FeSx/γ‐Al2O3 catalysts

Improving So2 And/Or No Removal by Activated Carbon Through Comprehensive Utilization of Inherent Pyrite and Calcite in Coal