Abstract:The carbon dioxide (CO2) methanation reaction is a process that produces methane (CH4) by reacting CO2 and H2. Many studies have been conducted on this process because it enables a reduction of greenhouse gases and the production of energy with carbon neutrality. Moreover, it also exhibits a higher efficiency at low temperatures due to its thermodynamic characteristics; thus, there have been many studies, particularly on the catalysts that are driven at low temperatures and have high durability. However, with regards to employing this process in actual industrial processes, studies on both toxic substances that can influence catalyst performance and regeneration are still insufficient. Therefore, in this paper, the activity of a Ni catalyst before and after hydrogen sulfide (H2S) exposure was compared and an in-depth analysis was conducted to reveal the activity performance through the regeneration treatment of the poisoned catalyst. This study observed the reaction activity changes when injecting H2S during the CO2 + H2 reaction to evaluate the toxic effect of H2S on the Ni-Ce-Zr catalyst, in which the results indicate that the reaction activity decreases rapidly at 220 °C. Next, this study also successfully conducted a regeneration of the Ni-Ce-Zr catalyst that was poisoned with H2S by applying H2 heat treatment. It is expected that the results of this study can be used as fundamental data in an alternative approach to performance recovery when a small amount of H2S is included in the reaction gas of industrial processes (landfill gas, fire extinguishing tank gas, etc.) that can be linked to CO2 methanation.

Dry Reforming of Model Biogas on a Ni/SiO2 Catalyst: Overall Performance and Mechanisms of Sulfur Poisoning and Regeneration

Experimental Study on Sulfur Deactivation and Regeneration of Ni-Based Catalyst in Dry Reforming of Biogas

Influence of H2S and NH3 on biogas dry reforming using Ni catalyst: a study on single and synergetic effect

Catalyst Deactivation and Regeneration Processes in Biogas Tri-Reforming Process. The Effect of Hydrogen Sulfide Addition

Deactivation and Regeneration Method for Ni Catalysts by H2S Poisoning in CO2 Methanation Reaction

New insight and countermeasure for sulfur poisoning on nickel-based catalysts during dry reforming of methane

Biogas Dry Reforming for Syngas Production: Catalytic Performance of Nickel Supported on Waste-Derived Sio2

Sulfur Poisoning Mechanism of Steam Reforming Catalysts: an X-ray Absorption Near Edge Structure (XANES) Spectroscopic Study.

Promotion Effect of H2S at High Concentrations on Catalytic Dry Reforming of Methane in Sour Natural Gas

Inspection over Carbon Deposition Features of Various Nickel Catalysts During Simulated Biogas Dry Reforming

Deactivation Mechanism Study for Sulfur-Tolerance Enhanced NiO Nanocatalysts of Lean Methane Oxidation

Syngas Production from Methane Steam Reforming and Dry Reforming Reactions over Sintering-Resistant Ni@SiO2 Catalyst

Impact of preparation method on nickel speciation and methane dry reforming performance of Ni/SiO2 catalysts

Modeling of catalyst poisoning during hydrogen production via methane steam and dry reforming

Deactivation and Regeneration for the SO2-Poisoning of a Cu-SSZ-13 Catalyst in the NH3-SCR Reaction

In situ observation of the promoting effect of H2S on the formation of efficient MoS2 catalyst for CH4/CO2 reforming

Energy-efficient Biogas Reforming Process to Produce Syngas: the Enhanced Methane Conversion by O2

Bi-reforming of model biogas into syngas over layered double hydroxides-derived bimetallic Ni-Ga catalysts

Biogas Reforming on Hydrotalcite-Derived Ni-Mg-Al Catalysts: the Effect of Ni Loading and Ce Promotion

Influence of Sulfur on the Carbon Deposition in Steam Reforming of Liquid Hydrocarbons over CeO2–Al2O3 Supported Ni and Rh Catalysts

Effects of regeneration conditions on sulfated CuSSZ-13 catalyst for NH 3 -SCR