Discovering the Interference of Hydrogen Sulfide on Polyethylenimine-Functionalized Porous Resin for Biogas Upgrading Via CO2 Adsorption
Yuan Meng,Tongyao Ju,Siyu Han,Yufeng Du,Fanzhi Meng,Jianguo Jiang
DOI: https://doi.org/10.1021/acssuschemeng.1c04089
IF: 8.4
2021-01-01
ACS Sustainable Chemistry & Engineering
Abstract:Because of the considerable CO2 adsorption capacity, selectivity, and stability, amine-functionalized materials have been recently investigated as promising adsorbents for biogas upgrading to biomethane, which provides the preferred gaseous bioenergy resource. Nevertheless, the typical impurity in biogas, H2S, has a potential influence on biogas upgrading, as another acid component to react with amines besides CO2. After all, even the trace H2S after biogas desulfurization might have an accumulative effect, based on previous experience in studying other acid impurities. Herein, we explored the interference of H2S (5-5000 ppm) on the prepared polyethylenimine-functionalized porous resin (PEI/HP20), which has exhibited excellent performance for biogas upgrading. The distinct of adsorption capacity, kinetic behavior, and regeneration performance between the two reactive components (CO(2)and H2S) in biogas was systemically investigated. It was found that, in contrast with CO2, the adsorbed H2S on PEDHP20 was not comparable through slow single-stage kinetic behavior and had limited impact, especially in consideration of the practical biogas upgrading within finite time. Besides, the reversible binding of H2S, proved by the regeneration performance and chemical characterization, was also favorable and pivotal for the PEI/HP20. In addition, the stable operation (capacity loss of 1%) by continuous adsorption-regeneration cycles under H2S-containing simulated biogas have finally demonstrated the ignorable interference of H2S on PEI/HP20, manifesting its strong adaptability in biogas upgrading.