Abstract:In this study, an NH3 plasma-treated Cu/HZSM-5 sorbent was introduced to simultaneously remove H2S and PH3 in low-temperature and low-oxygen environments. The effects of the Cu loading amounts, modification methods, and plasma-treatment conditions on the adsorption–oxidation performance of the sorbents were investigated. From the performance test results, the sorbent treated by NH3 plasma with the specific energy input (SEI, electrical input energy to the unit volume of gas) value of 1 J·mL–1 (Cu/HZSM-5-[S1]) was identified as having the highest breakthrough capacities of 108.9 mg S·g–1 and 150.9 mg P·g–1 among all of the materials tested. After three times of regeneration, the sorbent can still maintain the ideal performance. The results of Fourier transform infrared (FT-IR) spectroscopy and CO2 temperature-programmed desorption (CO2-TPD) indicated that the NH3 plasma treatment can introduce amino groups (functional groups) onto the sorbent surface, which greatly increases the number and strength of the basic sites on the sorbent surface. Results of N2 adsorption/desorption isotherms and scanning electron microscopy–energy dispersive spectroscopy (SEM–EDS) showed that the morphology of the sorbent changed after the plasma treatment, which exposed more active sites (copper species). In situ IR spectra showed that the amino groups are continuously consumed during the reaction process, indicating that these amino groups can help sorbents to capture gas molecules. Moreover, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses indicated that CuO is the main active species and the consumption of CuO and accumulation of the reaction products on the surface and inner pores of the sorbent are the primary reasons for the deactivation of the sorbent.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02584?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02584</a>.Characterization methods (Appendix S1); effect of different Cu contents on the simultaneous removal of H2S and PH3 (Figure S1); discharge characteristics (Figure S2); N2 adsorption/desorption isotherms (Figures S3 and S4a); XRD patterns (Figures S4b and S5); wide-survey XPS spectra (Figure S6); sequential in situ IR spectra (Figure S7); physical properties (Tables S1 and S2); and XPS data (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02584/suppl_file/am1c02584_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Regeneration of the exhausted mesoporous Cu/SBA-15-[N] for simultaneous adsorption–oxidation of hydrogen sulfide and phosphine

Enhanced Electro-Activity of Nickel Phosphide by Pre-Treatment for Efficient Hydrogen Sulfide Elimination

Study on Deactivation by Sulfur and Regeneration of Pd/C Catalyst in Hydrogenation of N-(3-nitro-4-methoxyphenyl) Acetamide

Adsorption Mechanism and Regeneration Performance of Calcined Zeolites for Hydrogen Sulfide and Its Application

Efficient Strategy to Regenerate Phosphorus-Poisoned Cu-SSZ-13 Catalysts for the NH 3 -SCR of NO x : The Deactivation and Promotion Mechanism of Phosphorus

In situ regeneration of sulfated Cu/SAPO-34 catalyst for the selective catalytic reduction of NOx with NH3

Deactivation and Regeneration for the SO2-Poisoning of a Cu-SSZ-13 Catalyst in the NH3-SCR Reaction

Effects of regeneration conditions on sulfated CuSSZ-13 catalyst for NH 3 -SCR

Nature Identification of Cu Active Sites in Sulfur-Fouled Cu/SAPO-34 Regeneration

Promoted adsorption performance for sulfide over CuO loaded hydrotalcite

Easily Regenerated CuO/γ-Al 2 O 3 for Persulfate-Based Catalytic Oxidation: Insights into the Deactivation and Regeneration Mechanism

Regeneration of Selective Catalyst Reduction Catalysts Deactivated by Pb, As, and Alkali Metals

Cu/ACF adsorbent modified by non-thermal plasma for simultaneous adsorption–oxidation of H2S and PH3

Surface characteristics of regenerative Fe-KOH/LSB catalysts for low-temperature catalytic hydrolysis of carbon disulfide and research of the surface regeneration mechanism

Cu/HZSM-5 Sorbent Treated by NH 3 Plasma for Low-Temperature Simultaneous Adsorption–Oxidation of H 2 S and PH 3

Deactivation and Regeneration of Commercial SCR Catalysts Used in a 660 MW Coal-Fired Power Plant

Research Progress on Sulfur Deactivation and Regeneration over Cu-CHA Zeolite Catalyst

Cu-Zn oxides nanoparticles supported on SBA-15 zeolite as a novel adsorbent for simultaneous removal of H2S and Hg0 in natural gas

Cu Nanoparticles Inlaid Mesoporous Carbon Aerogels as a High Performance Desulfurizer.

Preparation of CuFe Nanocomposites Loaded Diatomite and Their Excellent Performance in Simultaneous Adsorption/oxidation of Hydrogen Sulfide and Phosphine at Low Temperature

In-situ regenerable Cu/Zeolite adsorbent with excellent H 2 S adsorption capacity for blast furnace gas