Abstract:Czochralski (CZ) silicon is a base material for manufacturing integrated circuits (ICs). The mechanical strength of CZ silicon determines the processing limitations and often dominates the issues related to packaging and failure of ICs. With the ever-smaller feature size of ICs, the scaling of device dimensions may indirectly lead to increase the stress in silicon substrate, thus increasing the probability of generating dislocations. Consequently, improving the mechanical strength of CZ silicon is of significance for increasing the manufacturing yield of ICs. In this work, we propose a strategy of co-doping germanium (Ge) impurity and nitrogen (N) impurity into CZ silicon to achieve better mechanical strength. In order to explore the feasibility of such a strategy, we comparatively investigate the room-temperature hardness and dislocation gliding behaviors in the temperature range of 600–1200 ℃ in the conventional CZ silicon, Ge-doped CZ silicon, N-doped CZ silicon, as well as N and Ge co-doped CZ silicon. The significant experimental results are described as follows. 1) Ge-doping, N-doping or co-doping of Ge and N hardly influences the hardness and therefore the dislocation gliding behavior at room temperature. 2) The suppressing effect of N-doping on the dislocation gliding is remarkable at 600–1000 ℃ and becomes weakened at the temperatures higher than 1100 ℃, while Ge-doping hardly affects the dislocation gliding at 600–900 ℃ but exhibits a strong suppressing effect on the dislocation gliding at 1000–1200 ℃. 3) Co-doping Ge and N impurities into CZ silicon can take the complementary advantages of both Ge- and N-doping to suppress the dislocation gliding at 600–1200 ℃. It is believed that N-doping can result in the formation of N-O complex-related pinning agents within the dislocation cores to suppress the dislocation gliding at 600–1000 ℃. For Ge-doping, it is supposed that Ge-O complexes acting as the pinning agents can form near the front of a single dislocation when the temperature is as high as 1000 ℃ and above. In a word, it is verified in this work that co-doping Ge and N into CZ silicon can further improve the mechanical strength at the processing temperatures of ICs fabrication.

Mechanism behind the Crack Formation in Hydrogen Doping Cz-Si Crystal Growth

Numerical Simulation on Hydrogen Induced Cracking Behavior of 4130X Hydrogen Storage Vessel with Defect

Grown-in Defects in Heavily Phosphorus-Doped Czochralski Silicon

Grown-In Defects in Heavily Boron-Doped Czochralski Silicon

Oxygen Precipitation in Nitrogen Doped Czochralski Silicon Wafers. I. Formation Mechanisms of Near-Surface and Bulk Defects

Influence of Grown-in Hydrogen on Thermal Donor Formation and Oxygen Precipitation in Czochralski Silicon Crystals

Recognition and Imaging of Point Defect Diffusion, Recombination, and Reaction During Growth of Czochralski-Silicon Crystals

Crystal-originated Particles in Germanium-Doped Czochralski Silicon Crystal

Defect structure of nitrogen doped czochralski silicon annealed under enhanced pressure

Defects in Ge-doped Cz-Si Annealed under High Stress

Properties of the structural defects during SiC–crystal–induced crystallization on the solid–liquid interface

Extended Defects in Nitrogen-Doped Czochralski Silicon During Diode Process

Defect nucleation in SOI wafers due to hydrogen ion implantation

Characterization of a Czochralski Grown Silicon Crystal Doped with 1020 Cm‐3 Germanium

Hydrogen diffusion behavior within microstructures near crack tip: A crystal plasticity study

Role of Nitrogen Related Complexes in the Formation of Defects in Silicon

Mechanical Strength of Czochralski Silicon Crystal: Effects of Co-Doping Germanium and Nitrogen

Crack Healing Behavior of 4H-Sic: Effect of Dopants

Impact of Thermal Stress on Intrinsic Point Defect in Czochralski Crystal Growth: Developing a Quantitative Model for Defect Formation and Distribution

Process-induced defects in nitrogen doped Czochralski silicon in diode processes

Recent Research on Hydrogen Behavior in Czochralski Silicon