Abstract:Carbon Fiber Reinforced Polymer (CFRP) is extensively utilized in the cutting-edge industries, attributed to its superior mechanical performances. The machining performance of CFRP, however, is significantly influenced by its pronounced anisotropy, particularly the fiber orientation. Consequently, Fiber Cutting Angle (FCA) is widely employed to assess the relationships between cutting geometry and machining performance, yet the coupling of cutting orientation and fiber orientation, along with the absence of feeding angle, limits the further exploration into the underlying mechanisms. This article introduced a novel geometrical framework termed "Cutting Geometry Space" (CGS), for modeling CFRP machining process. Incorporating feeding orientation, cutting orientation and fiber orientation, CGS is applied in milling process for an enhanced comprehension of cutting geometry. Additionally, a pragmatic milling experiment is designed, efficiently evaluating the performances of 1092 combinations of CGS parameters in 13 T700-12K/epoxy CFRP specimens. Microscopical observations and morphological analyses reveals four predominant fracture mechanisms in CFRP machining, with fiber-matrix debonding and bending-induced fracture identified as the key contributors to macroscopic cavity formation. A designated "Damage Zone" within the CGS, encompassing a cutting angle range of 90 degrees-270 degrees degrees -270 degrees and a fiber tilt angle of 15 degrees-60 degrees, degrees -60 degrees , is identified as a high-risk area for machining-induced surface cavities. Additionally, the impact of feeding orientation on the surface integrity is confirmed and explained by the influence on the equivalent FCA. Furthermore, the study elucidates chatter marks as a phenomenon induced by a confluence of factors, including generalized down milling, high FCA, and a significant effective cutting fiber count. The observed shift in chatter mark with varying feeding angles provides deep insights into the complex dynamics of machining parameters.

Modeling of the catastrophe of chip flow angle in the turning with double-edged tool with arbitrary rake angle based on catastrophe theory

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Simulation of Chip Formation in High-Speed Hard Machining

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

Influence of Tool Geometrical Parameters on High Speed Cutting of Titanium Alloy Ti6Al4V

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Analytical prediction of chip flow direction in cylindrical turning considering rounded edge effect

An Improved Chip Flow Model Considering Cutting Geometry Variations Based on the Equivalent Cutting Edge Method

Influence of Tool Rotation Errors on Flank Machined Surface

Theoretical Analysis of Serrated Chip Formation Based on Ideal Models in High Speed Cutting

Effect of Tool Rotation Erroron the Topography of Flank Machined Surface

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

A Unified Geometrical Modeling and Analysis Method for Evaluating CFRP Machining Performance: Cutting Geometry Space

On the prediction of chip flow angle in non-free oblique machining

Influence of Tool Assembly Error on Machined Surface in Peripheral Milling Process

Accurate Modeling of Working Normal Rake Angles and Working Inclination Angles of Active Cutting Edges and Application in Cutting Force Prediction

Numerical and Experimental Investigation of the Shear Angle in High-Speed Cutting of Al6061-T6

Effects of chip breaker groove and tool nose radius on progressive tool wear and behavior when turning GH3536 nickel-based superalloys

Analysis of Critical Negative Rake Angle and Friction Characteristics in Orthogonal Cutting of AL1060 and T2.