Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Support Vector Machines-Based Method for Machining Error Prediction Modeling

Effect of Tool Rotation Erroron the Topography of Flank Machined Surface

Synthetic Error Modeling for NC Machine Tools Based on Intelligent Technology

Prediction of machining accuracy based on geometric error estimation of tool rotation profile in five-axis multi-layer flank milling process

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Influence of Tool Rotation Errors on Flank Machined Surface

Error Analysis and Compensation Method for Motion Errors of NC Machine Tools under Cutting Loads

Influence of Tool Assembly Error on Machined Surface in Peripheral Milling Process

Support Vector Machine and Neural Network United System for NC Machine Tool Thermal Error Modeling

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Thermal error modeling and forecasting for NC machine tools based on intelligent technology

Model for Surface Topography Prediction in Cylinder Turning

Study on Precision Modeling and Prediction of Five-axis NC Machine Tool

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Numerical Solution of Simultaneous Equations Based Geometric Error Compensation for CNC Machine Tools with Workpiece Model Reconstruction

High-precision machining technology based on analytical method for integral impeller with flank milling

Analysis of Present Research about Thermal Error Identification Model of NC Lathe

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

A machining error prediction approach without iteration for thin-walled part in flank milling

Five-axis flank milling error model of a face gear considering the tool tip dynamics