A machining error prediction approach without iteration for thin-walled part in flank milling
Jianing Dang,Baohai Wu,Qingqing Cui,Zhao Zhang,Ying Zhang
DOI: https://doi.org/10.1016/j.jmapro.2024.06.038
IF: 5.684
2024-06-19
Journal of Manufacturing Processes
Abstract:Due to the low stiffness, thin-walled part usually deforms in flank milling, resulting in a low machining precision. Error prediction is generally adopted to improve the precision of flank milling of thin-walled part as the predicted error is indispensable data for improvement. However, since cutting force and deformation will influence each other and the practical behavior of cutter and part (PBCP) in the milling is confusing, when predicting errors, iteration is always involved, which reduces prediction efficiency. Thus, in order to reveal the PBCP and improve prediction efficiency, this paper establishes the PBCP model first and then, according to the PBCP model, proposes a machining error prediction approach without iteration. First, the inspiration for the PBCP model is introduced. Then, the cutter and part are divided into differential elements and the PBCP model, which consists of the part for a single element and the part for influence between elements, is established. Subsequently, the machining error prediction approach without iteration is proposed based on the PBCP model. Finally, experiments are conducted to verify the proposed approach. The results show that most errors of prediction are within 0.03 mm and the prediction efficiency is significantly improved. Therefore, it is concluded that the PBCP model and the proposed approach are effective. Besides, based on the PBCP model, the variation tendency and value of the feed per tooth and entry angle of three sections of the part in the milling are also revealed.
engineering, manufacturing