Abstract:In current five-axis computer numerical control (CNC) machining, the use of minute linear path segments as an approximation for the ideal cutter contacting (CC) point trajectory is still prevalent. However, introducing rotation axes leads to a deviation of the actual CC point trajectory from the ideal, resulting in nonlinear errors. An integrated method is proposed in this paper for compensating and correcting both the contour error, associated with the approximation of the part surface by the ideal CC point trajectory and the nonlinear error of the CC point trajectory based on the information in the CC point data. By analyzing the spatial relationship between the tool posture and the CC point path during the five-axis linear interpolation process, two adjacent machining tool positions containing CC point data information are selected as the starting and ending points of the five-axis linear interpolation machining. The ideal tool center point and the actual CC point are calculated during the interpolation process, as well as the distance and the unit vector in the perpendicular direction between the actual CC point and the ideal CC point trajectory segment. In the comprehensive error compensation and correction phase, the obtained unit vectors are used as direction vectors for error compensation, and the tool center point during interpolation is first compensated and corrected. This ensures the actual CC point and the contour curve are on the same plane. The compensation direction for contour error is calculated using the start/end tool axis vectors and the ideal CC point trajectory vectors. The size of the contour error approximating the contour curve is calculated through the chord error. A second compensation and correction are applied to the tool center point for interpolation, ultimately achieving comprehensive compensation and correction of nonlinear errors. The data calculations were conducted in the MATLAB environment using actual machining data. After compensation and correction, the contour error was reduced by 76%, the nonlinear error of the CC point trajectory decreased to below 0.88 μm, and the comprehensive nonlinear error of the CC point trajectory was reduced from 19 to 1.5 μm, a reduction of 93%. This demonstrates significant practical value in enhancing the accuracy of five-axis CNC machining. Through actual machining verification, after using the method described in this paper, the average surface roughness decreased from 1.133 to 0.220 μm, and the maximum surface roughness decreased from 6.667 to 1.240 μm. This significantly demonstrates that the compensation and correction method proposed in this paper can significantly improve the surface quality of machined parts.

A Normal Section Plane Method for Profile Error Analysis of Five-Axis Machine Tools Based on the Ideal Tool Flank Milling Surface

An accurate surface error optimization for five-axis machining of freeform surfaces

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

An integrated method for compensating and correcting nonlinear error in five-axis machining utilizing cutter contacting point data

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

Geometric Deviation Reduction Method for Interpolated Toolpath in Five-Axis Flank Milling of the S-shaped Test Piece

Machining Error Inspection of T-spline Surface by On-Machine Measurement

A method of sensitivity analysis and precision prediction for geometric errors of five-axis machine tools based on multi-body system theory

Surface Contour Error Model of Five-Axis Machining Considering Multifactor Coupling Effects

An Improved Positioning Method for Flank Milling of S-shaped Test Piece

Machined Nurbs Surface Description Using On-Machine Probing Data

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Identification of Kinematic Errors of Five-Axis Machine Tool Trunnion Axis from Finished Test Piece

Error Compensation of Free-Form Surface with Critical Area Based on T-spline Surface Reconstruction.

F Test-Based Automatic Modeling of Single Geometric Error Component for Error Compensation of Five-Axis Machine Tools

An efficient method for measuring and identifying geometric and dynamic errors in dual five-axis machine tools

Five-axis flank milling error model of a face gear considering the tool tip dynamics

Prediction of machining accuracy based on geometric error estimation of tool rotation profile in five-axis multi-layer flank milling process

An accuracy evolution method applied to five-axis machining of curved surfaces

Elliptical Model for Surface Topography Prediction in Five-Axis Flank Milling