Abstract:In S-shaped specimens which are frequently used to reflect the machining ability of machine tools, the surface error refers to the distance between the points on the actual machining surface to their relevant points on the design surface. The proper measurement of this error is crucial for evaluating the machining quality of S-shaped specimens. During the process of error measurement, improper registration between the measurement coordinate system and the design coordinate system, as well as neglected uncertainty remain the main obstacles for the quality evaluation of S-shaped specimens. This study proposes a general method for the high-precision machining quality evaluation of S-shaped specimens that overcomes both problems. By applying the non-uniform rational Bspline (NURBS) surface molding technology, the surface of S-shaped specimen was reconstructed. Based on the minimum area principle and the particle swarm optimization-sequential quadratic programming (POS-SQP) algorithm, a surface error model of S-shaped specimen was developed. This model minimizes the maximum distance of the transacted measurement points to the design surface. It can be used to obtain the optimal registration matrix of the measurement coordinate system, with minimal surface error of S-shaped specimen. Additional common algorithms were also adopted to search the optimal registration matrix for comparison. Accounting for the random characteristics of basic parameters and the nonlinearity of surface error model, an uncertainty model of the surface error of S-shaped specimen was established based on the Monte Carlo method. This could obtain the actual tolerance zone of the surface error, according to which, the allowable tolerance zone of the surface error was optimized and a defined evaluation result of machining quality of S-shaped specimen was obtained. Then, a general approach for the evaluation of the machining quality of S-shaped specimen was developed based on POS-SQP algorithm and Monte Carlo method. This approach was implemented in a case study though a series of experiments. The experimental results identified the proposed approach as effective in improving the measurement quality and the evaluation of the machining quality of S-shaped specimens can thus be performed within an allowable tolerance zone.

Machining Error Inspection of T-spline Surface by On-Machine Measurement

Error Compensation of Free-Form Surface with Critical Area Based on T-spline Surface Reconstruction.

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

Machined Nurbs Surface Description Using On-Machine Probing Data

Calculation Method for Machining Error of Thin-Walled Parts Based on On-Machine Measurement

On-Machine Measurement of Location Errors on Five-Axis Machine Tools by Machining Tests and A Laser Displacement Sensor

A New Error Measurement Method to Identify All Six Error Parameters of A Rotational Axis of A Machine Tool

Intelligent Sampling Strategy for Freeform Surfaces Based on On-Machine Measurement Through Real-Time Interactive Communication.

Error compensation for machining of sculptured surface based on on-machine measurement and model reconstruction

Identification of Kinematic Errors of Five-Axis Machine Tool Trunnion Axis from Finished Test Piece

A General Approach for the Machining Quality Evaluation of S-shaped Specimen Based on POS-SQP Algorithm and Monte Carlo Method

Modeling and Analysis of Uncertainty in On-Machine Form Characterization of Diamond-Machined Optical Micro-Structured Surfaces

Lathe errors identification based on surface topography analysis after turning

An Accurate Characterization Method to Tracing the Geometric Defect of the Machined Surface for Complex Five-Axis Machine Tools

Development and Application of Interferometric On-Machine Surface Measurement for Ultraprecision Turning Process

An Optimized Single-Point Offset Method for Reducing the Theoretical Error of S-shaped Test Piece

On-machine measurement method and geometrical error analysis in a multi-step processing system of an ultra-precision complex spherical surface

Separating Machining Errors of S-shaped Samples Based on the Comprehensive Error Field of Five-Axis Machine Tools

On-machine Measurement and Compensation of Thin-Walled Surface

Geometric error identification for three-axis machine tools based on on-machine measurement of a calibrated artefact

Non-contact on-machine measurement using a chromatic confocal probe for an ultra-precision turning machine