Abstract:Due to the weak rigidity of flexible thin-walled part and tool, deformation inevitably occurs under the action of a cutting force in the flank milling of thin-walled parts, resulting in reductions of the machining accuracy and efficiency. To solve the above problem, a force-induced deformation prediction model based on the static substructure method and a flexible error compensation strategy for the deformation of the thin-walled part and tool in flank milling are proposed. The tool is considered to be a cantilevered beam to calculate its deformation. The thin-walled part is divided into two substructures, namely, the substructure with the material to be cut (STBC) and the unmachined substructure, which remains unchanged. Deformation models of the two substructures are constructed based on the element stiffness matrix of the thin-walled part. The time-varying stiffness and the removed material from the thin-walled part are only updated in the deformation model of the STBC. The deformation model of the entire thin-walled part is constructed by coupling the deformation models of the two substructures. In this way, the degrees of freedom of the deformation model of the entire thin-walled part are significantly reduced. To reduce the deformation error, a flexible error compensation strategy is proposed. The tool location at the initial feed position is directly compensated by the mirror principle. For the other tool locations, the tool location at the next feed position is adjusted with the compensated tool location at the previous feed position as the initial iteration value. This flexible error compensation strategy is based on the continuity of the compensated toolpath, which is close to the actual cutting process and adjusts the tool locations with high convergence. Finally, the proposed methods are proven via flank milling experiments. The deformation prediction results agree with the experimental results, and the deformation errors are reduced greatly after error compensation by using the proposed strategy.

Influence of Tool Rotation Errors on Flank Machined Surface

Effect of Tool Rotation Erroron the Topography of Flank Machined Surface

Effects of Tool Flank Wear on Orthogonal Cutting Process of Aluminum Alloy

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Influence of Tool Assembly Error on Machined Surface in Peripheral Milling Process

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Effects of Geometric and Spindle Errors on the Quality of End Turning Surface

Prediction of machining accuracy based on geometric error estimation of tool rotation profile in five-axis multi-layer flank milling process

Five-axis flank milling error model of a face gear considering the tool tip dynamics

Force-induced deformation prediction and flexible error compensation strategy in flank milling of thin-walled parts

Adaptive tool path generation for flank milling of thin-walled parts based on force-induced deformation constraints

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Machining Deformation Prediction of Thin-Walled Workpieces in Five-Axis Flank Milling

Surface form error prediction in five-axis flank milling of thin-walled parts

Surface Contour Error Model of Five-Axis Machining Considering Multifactor Coupling Effects

Optimal Deformation Error Compensation Process in Flank Milling of Thin-Walled Workpieces

Mechanism and force modeling for cross-edges in the flank-end milling process based on the constrained cutting theory

High-precision machining technology based on analytical method for integral impeller with flank milling

Error Compensation in the Five-Axis Flank Milling of Thin-Walled Workpieces

Dimensional surface error prediction model in five-axis flank milling for thin-walled parts