Abstract:Due to the weak rigidity of flexible thin-walled part and tool, deformation inevitably occurs under the action of a cutting force in the flank milling of thin-walled parts, resulting in reductions of the machining accuracy and efficiency. To solve the above problem, a force-induced deformation prediction model based on the static substructure method and a flexible error compensation strategy for the deformation of the thin-walled part and tool in flank milling are proposed. The tool is considered to be a cantilevered beam to calculate its deformation. The thin-walled part is divided into two substructures, namely, the substructure with the material to be cut (STBC) and the unmachined substructure, which remains unchanged. Deformation models of the two substructures are constructed based on the element stiffness matrix of the thin-walled part. The time-varying stiffness and the removed material from the thin-walled part are only updated in the deformation model of the STBC. The deformation model of the entire thin-walled part is constructed by coupling the deformation models of the two substructures. In this way, the degrees of freedom of the deformation model of the entire thin-walled part are significantly reduced. To reduce the deformation error, a flexible error compensation strategy is proposed. The tool location at the initial feed position is directly compensated by the mirror principle. For the other tool locations, the tool location at the next feed position is adjusted with the compensated tool location at the previous feed position as the initial iteration value. This flexible error compensation strategy is based on the continuity of the compensated toolpath, which is close to the actual cutting process and adjusts the tool locations with high convergence. Finally, the proposed methods are proven via flank milling experiments. The deformation prediction results agree with the experimental results, and the deformation errors are reduced greatly after error compensation by using the proposed strategy.

Dimensional surface error prediction model in five-axis flank milling for thin-walled parts

Surface form error prediction in five-axis flank milling of thin-walled parts

Surface Contour Error Model of Five-Axis Machining Considering Multifactor Coupling Effects

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Machining Deformation Prediction of Thin-Walled Workpieces in Five-Axis Flank Milling

Prediction of Cutting Forces in Flank Milling of Parts with Non-Developable Ruled Surfaces

Force-induced deformation prediction and flexible error compensation strategy in flank milling of thin-walled parts

Adaptive tool path generation for flank milling of thin-walled parts based on force-induced deformation constraints

Error Compensation in the Five-Axis Flank Milling of Thin-Walled Workpieces

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

A Cutting Force Model Based on Compensated Chip Thickness in Five-Axis Flank Milling

Numerical Simulation and Analysis of Symmetry and Step-symmetry Milling of Aerospace Thin-walled Workpiece

Elliptical Model for Surface Topography Prediction in Five-Axis Flank Milling

Numerical evaluation of cutting strategies for thin-walled parts

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Surface Topography Prediction Model in Milling of Thin-Walled Parts Considering Machining Deformation

An accurate surface error optimization for five-axis machining of freeform surfaces

602 FEM-based Simulation for Workpiece Deformation in Thin-Wall Milling

Five-axis flank milling error model of a face gear considering the tool tip dynamics

Influence of Tool Rotation Errors on Flank Machined Surface

A real time machining error compensation method based on dynamic features for cutting force induced elastic deformation in flank milling